Stuff to dispense with pt 1.
Patrick Finnegan
pat at computer-refuge.org
Sun Apr 18 12:07:06 CDT 2010
I'm still here. For those I haven't responded to, I hope to go through
them tonight. It looks like I'll need to make up a diagram or
spreadsheet to track who wants/gets what.
Pat
On Sunday 18 April 2010, Dan Gahlinger wrote:
> oooh a bit far to drive to pickup from toronto.
>
> has anyone heard back from him? I've asked for a few items, but they
> may be taken by now :(
>
> Dan.
>
> > On Apr 15, 2010, at 5:39 PM, Patrick Finnegan <pat at computer-
> >
> > refuge.org> wrote:
> > > Looks like I forgot to mention, this is all in a commercial
> > > building in
> > > downtown Lafayette, IN, USA, zip 47901.
> > >
> > > Pat
> > >
> > > On Thursday 15 April 2010, Patrick Finnegan wrote:
> > >> This is what I'm attempting to get rid of from my warehouse. I
> > >> would like to get something for the machines, but mostly want to
> > >> make sure that the stuff doesn't get scrapped. Everything is
> > >> assumed to work, but I have no guarantees that it does, and it
> > >> hasn't been turned on in quite a while, but it has been stored
> > >> in a climate-controlled warehouse. I'm open to some trades, and
> > >> negotiable on prices for most stuff. I'm not willing to ship
> > >> anything myself, but may be willing to drop it off somewhere to
> > >> be shipped - I mostly don't have time to pack this stuff. Email
> > >> me for more info on any of this stuff.
> > >>
> > >> For the most part, this stuff needs to be gone by May 14th- when
> > >> I leave for Dayton Hamvention. I may be able to bring smaller
> > >> (desktop box) stuff with me, but larger stuff I won't be able to
> > >> transport to the show with everything else I'm bringing. Some
> > >> of the stuff will start disappearing at the end of next week via
> > >> scrap or eBay if I don't hear anything by then.
> > >>
> > >> + VAX 8700 w/ TU-81+ and SA482. Haven't had a chance to power
> > >> up, and will keep this if I don't get a good offer. Want around
> > >> $500 for it. + DG Nova 2 w/ PERTEC 9-track tape drive and dual
> > >> 8" floppy. Asking $750, this will go to eBay if I don't get any
> > >> takers. + DG Nova 4. Have 3 or 4, some missing the front-panel.
> > >> 3rd party Disk/QIC tape rackmount box that goes with them.
> > >> + BA-11 10.5" tall UNIBUS expansion boxes. $25 each
> > >> + SGI Onyx prototype machine. The same size and chassis as a
> > >> Challenge XL. $100
> > >> + PDP-11/23 w/RL02s in corporate cab. $200
> > >> + RM-02 drives. I have 4, want to keep at least one. Never had
> > >> much luck getting them to work with my RH-11 on my 11/84, but I
> > >> don't think there's anything wrong with the drives themselves.
> > >> $200 each + VAX 4000/200. I have two or 3 of these. $100 each
> > >> + DEC CMR53. 2 of these. A pdp-11/53 system with some special
> > >> communications cards in them. $100 each
> > >> + AlphaServer 4100. $20
> > >> + Various VAXstation 3100s for whatever I can get for them
> > >> + 4 tape drives from IBM 3480-B22 tape units. I've considered
> > >> saving this for spares, but I'm not sure I care enough.
> > >> + IBM S/390 G5 coupling facility. I'd really like to find the
> > >> replacement software for the SE to make it into a "standard"
> > >> CPU, so that I can at least run Linux on it, but I'm not sure
> > >> that's likely. $200.
> > >> + Encore Mulitmax UNIX box. 32 x NS32332 processors and 128MB
> > >> ram, and a 2nd rack with a 9-track tape drive and some 8" hard
> > >> disks. $250. + General Automation SPC16/40 and 16/45. Missing
> > >> the front panel for one of the two, have an I/O box, and PSUs.
> > >> needs some repair work. One of the PSUs needs new capacitors.
> > >> Will keep unless I can get $500 or so for the both of them.
> > >> + HP 1000 E-series, I think. Two of these. $200 each?
> > >> + IBM RS/6000 SP. I've got one frame with quad-375MHz POWER3-II
> > >> thin nodes, and one high node (16GB ram, 16 x 375MHz). $200 +
> > >> DEC VT240 terminals. Probably 10. $5 each
> > >> + IBM 9343-C02 DASD box. I have someone interested, but haven't
> > >> heard from them in a while, and am not sure how interested they
> > >> really are ... I'd like to get $100 for it.
> > >> + Two Amiga 2000 Video Toaster boxes. I may end up keeping one.
> > >> $100. + Various IBM UNIX desktop systems, desktop VAXes, etc.
> > >> $5 each. + Altos 8000 and 8600 systems. $10 each.
> > >> + Tektronix 4010 terminal. $100.
> > >> + Tullamore/Victoreen SCIPP 1600 1600-channel pulse-height
> > >> analyzer. Powers up, but not tested much more than that. Looks
> > >> cool, and has CORE memory inside. $50. Some pics I took a
> > >> while ago:
> > >> http://www.flickr.com/photos/vax-o-matic/sets/72157622536984302/
> > >>
> > >> That's all I can recall for now.
> > >>
> > >> Pat
>
> _________________________________________________________________
> Hotmail & Messenger. Get them on your phone now.
> http://go.microsoft.com/?linkid=9724463
>
--
Purdue University Research Computing --- http://www.rcac.purdue.edu/
The Computer Refuge --- http://computer-refuge.org
More information about the cctech
mailing list