SCSI to IDE/SD community project

[Andrew Lynch]

Hi!  I made this offer at Vintage-Computer.com forums and got some response
so am also making the same offer on CCTALK.  The following link is the
design I referring to:

 

http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=SCSI2IDE

 

I am trying to decide what to do with the SCSI to IDE/SD project. I think it
would be a good and helpful thing to have but recognize it may be too
specific or overcome by events. If you are interested in buying a prototype
board please contact me at 

mailto:LYNCHAJ at YAHOO.COM?subject=SCSI2IDE

If there are 5 people interested I can get a batch of five PCBs made for
$150 or $30 each. If there are 10 I think I can get the prototype board cost
reduced to around $20 each. 

Please note if you buy a prototype board you don't have to actually build
and test it. You can buy a board and have it sent to a volunteer builder for
build and test.

If the SCSI2IDE project is to succeed we have to get past the prototype
board phase and into the hands of builders for coding. Obviously with
prototype boards there are no assurances and you can expect there will be
problems. We have to find those and fix them before a manufactured PCB is
even a possibility.

Thanks and have a nice day!

Andrew Lynch