brianlanning at gmail.com
Wed Jan 27 22:18:30 CST 2010
On Wed, Jan 27, 2010 at 6:42 PM, Jim Brain <brain at jbrain.com> wrote:
> On 1/27/2010 5:44 PM, Dan Gahlinger wrote:
>> Jim Brain should be able to build this in his sleep ;)
>> (assuming he's not too busy)
> I'm happy to help, but the pic's a bit too small for me to see the
> specifics. If you can get a good scan, and some info on the connectors and
> the IC on board, that would be helpful.
> I noticed it says the passthrough is of limited use due to the missing
> Buster IC. Does that imply there's no practical point in designing the pro
A bit more info... apparently the card edge connector for the amiga 500 is
the same as the CPU slot on an amiga 2000. There are 1000s of amiga 2000
boards out there with acid damage from leaky batteries. They're not
right-angle connectors though, so I'm not sure how well that would work.
There are 1000s of scsi controllers out there for the 2000, many with ram on
them that would be cheap and plentiful that could plug right into this.
More information about the cctech