Help with a "Mark 1" 6502 SBC

[steve shumaker]

This unit was purchased some time back off Craig's List from an 
individual who stated he couldn't even remember where he acquired it.. 
Thus it has no provenance of any kind. There appears to be no 
information on the web searching the usual places and using the obvious 
terms.

Unit is labeled "Mark 1". It has a 6502 CPU and the appropriate support 
chips to qualify as a SBC although the keypad is not labeles as a 
typical hex pad. Date codes seem to be early 80s. The printer uses a 
character belt rather than thermal.

only label anywhere on the unit seems to be the two "Made in Hong Kong" 
stickers!

thoughts/suggestions on what this is or where to look for more info 
would be most welcome! (plan to post a msg on 6502.org but figured to 
start here)


http://picasaweb.google.com/114639080007220617932/Mark1SBC6502?feat=directlink


steve



On 11/9/2010 11:49 PM, Rod Smallwood wrote:
> Well I'm in England (Old not New) but please don’t let the Northstar go
> anywhere. I think you may be in Colorado. (Lovely state)
>
>
> Regards
>
> Rod Smallwood
>
> -----Original Message-----
> From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
> On Behalf Of les at frii.com
> Sent: 09 November 2010 20:35
> To: cctech at classiccmp.org
> Subject: Re: Northstar Horizion
>
> Rod,
> I am not sure where you are located, but I have a complete NS Horizon
> you can have.
>
> Les
>
>
>