Help with a "Mark 1" 6502 SBC

[Geoffrey Reed]

Looks like some sort of dialler unit,  possibly for international calls???


On 11/10/10 12:25 PM, "steve shumaker" <shumaker at att.net> wrote:

> This unit was purchased some time back off Craig's List from an
> individual who stated he couldn't even remember where he acquired it..
> Thus it has no provenance of any kind. There appears to be no
> information on the web searching the usual places and using the obvious
> terms.
> 
> Unit is labeled "Mark 1". It has a 6502 CPU and the appropriate support
> chips to qualify as a SBC although the keypad is not labeles as a
> typical hex pad. Date codes seem to be early 80s. The printer uses a
> character belt rather than thermal.
> 
> only label anywhere on the unit seems to be the two "Made in Hong Kong"
> stickers!
> 
> thoughts/suggestions on what this is or where to look for more info
> would be most welcome! (plan to post a msg on 6502.org but figured to
> start here)
> 
> 
> http://picasaweb.google.com/114639080007220617932/Mark1SBC6502?feat=directlink
> 
> 
> steve
> 
> 
> 
> On 11/9/2010 11:49 PM, Rod Smallwood wrote:
>> Well I'm in England (Old not New) but please don¹t let the Northstar go
>> anywhere. I think you may be in Colorado. (Lovely state)
>> 
>> 
>> Regards
>> 
>> Rod Smallwood
>> 
>> -----Original Message-----
>> From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
>> On Behalf Of les at frii.com
>> Sent: 09 November 2010 20:35
>> To: cctech at classiccmp.org
>> Subject: Re: Northstar Horizion
>> 
>> Rod,
>> I am not sure where you are located, but I have a complete NS Horizon
>> you can have.
>> 
>> Les
>> 
>> 
>>    
>