Data I/O Unipak 2B ?

[dwight elvey]

> From: hp-fix at xs4all.nl
> 
> Steven,
> 
> The manuals are on bitsavers
> http://bitsavers.informatik.uni-stuttgart.de/pdf/dataIO/
> 
> -Rik
> 
> -----Oorspronkelijk bericht-----
> Van: cctalk-bounces at classiccmp.org [mailto:cctalk-bounces at classiccmp.org]
> Namens alan canning
> Verzonden: zondag 14 november 2010 20:56
> Aan: General Discussion: On-Topic and Off-Topic Posts
> Onderwerp: Data I/O Unipak 2B ?
> 
> I just bought a Data I/O 29B with an Unipak 2B from Epay. Everything seems
> okay BUT the pinout cartridge ( the little module that plugs in the end of
> the 2B ) is missing. I suspect that all it has is some kind of simple
> interlock like two pins tied together to tell the Data I/O the cartridge is
> there ( probably so you can't run the unit with that HAZARDOUS 20 volts on
> the open connector. Anybody know how to get around this or fake it ? The
> unit won't do squat without it.... Have not been able to find a schematic
> of the 2B or the pinout cartridge. Thanks.
> 
> Best regards, Steven
> 
 
Hi
 What cartridge? I have a 19 with Unipak but I don't recall seeing
any cartridge that would configure it. It has circuit boards with
lots of parts. I'll look at it the next time I get a chance but
maybe I don't remember.
Dwight