Smoke From PSU Socket

[Tony Duell]

> I have found the time to open up the DELNI again. The module is a Schaffner
> 323 6/05. It looks very similar to the FN9222 here:
> http://www.schaffner.com/components/en/product/productL22.asp?level=3$1$2&la

And that looks like a very standard typoe of IEC320 plug with a built-in 
mains filter. It';s also a design that I've never tried to open to 
repair, because it's so common. 

The parameters that matter are the maximum voltage that the capacitors in 
the filter will stand (but I wouild be suprised if any wouldn't take 240V 
mains), and the maximum current that the inductor in the filter can 
carry. The latter should be more than the fuse rating in the device. But 
I can't believe  DELNO takes that much current, so most filters will be OK.

> nguage_id=12. Should I be able to substitute the failed one for a modern
> one, such as the FN9222?

I would think so. 

-tony