M9301-YB Bootstrap/Terminator ROM dumps / listings?
useddec at gmail.com
Wed Apr 29 21:15:52 CDT 2015
I have M7800s. Please contact me off list if you are interested.
On Wed, Apr 29, 2015 at 5:58 PM, Noel Chiappa <jnc at mercury.lcs.mit.edu>
> > From: Jorg Hoppe
> > I also have a spare DL11-W to offer
> Josh, if you want a second serial line, it's best to use a regular DL11
> (M7800), not a DL11-W. (M7800s are available on eBay, for pretty modest
> amounts.) The reason is that each DL11-W presents a load on the line clock
> signal (from the power supply), even if the line clock on the second board
> disabled; several Dl11-W's, and the line clock signal may get overloaded.
> > From: Josh Dersch
> > I need to scare up a second SLU so I can get an emulated TU-58 hooked
> > up to try booting XXDP
> I'm not sure any M9301 variant supports the TU-58? Some are set up to boot
> over the console serial line, though. (I haven't yet checked the code, so I
> don't know whether you need to feed it the absolute loader first, or if it
> will just take .LDA files directly.)
> And I just realized you're working with a -YB, and I've been dis-assembling
> the -YA! Fat lot of use that would have been! Oh well, I assume the code is
> fairly similar, I'll do the -YB next. (Anyone have a dump, to start me
> > comparing the diagnostic/console PROM listings to what I have
> Where were those from? Thanks in advance...
> > From: Henk Gooijen
> > I could be wrong, but ISTR that in the first few words of a ROM are
> > two capitals of the boot device that the PROM supports.
> Not in the M9301-YA, in either bank.
More information about the cctech