Freight recommendation for a teletype?
drlegendre at gmail.com
Mon Aug 17 22:41:22 CDT 2015
For real? That's just so cool!
And yes, this list has more than its share of extraordinary members. Just
today, after putting out a request for some Osborne boot media - not only
did half a dozen or more learned individuals respond to my questions, but
+two+ of them offered to locate and / or send bootable media for the
It's a great group of folks, and I'm genuinely thankful to be in their
On Mon, Aug 17, 2015 at 10:28 PM, Randy Dawson <rdawson16 at hotmail.com>
> Hi John,
> A testament to the extraordinary community that is classiccmp.
> will certainly take you up on it, and get you a check, and/or some of
> the other great junk lying around here. I'm pretty well equipped with a
> good electronics lab. Do you need a scope? I have a few Tektronix
> digital scopes and I cant possibly use them all. 100 MHz ....
> not sure about the lockdown, I imagine when its undone the bolt is
> stored in a available hole inside, and possibly is still there.
> will see what comes back from craters and freighters and UShip, the
> thing has to be taken off the pedestal and wrapped/banded onto a
> Let me know what you need, and hey,
> > Date: Mon, 17 Aug 2015 21:49:59 -0500
> > To: rdawson16 at hotmail.com
> > From: jfoust at threedee.com
> > Subject: RE: Freight recommendation for a teletype?
> > At 09:29 PM 8/17/2015, you wrote:
> > >123 N Washington St. Elkhorn WI 53121.
> > >I asked for a quote from Craters and Freighters, and the UShip site.
> > I'm not sure if I can help, but I thought I'd chime in.
> > I'm 45 minutes from there, 30 minutes if I'm at my fiancée's place.
> > (Jefferson, WI and Janesville, WI, respectively.)
> > I do have a friend with a loading dock and pallets and wrap.
> > You do need to lock down the upper machinery with the shipping bolt
> > or it'll destroy itself, depending on the shipping method.
> > I have a 33 and a 28, too.
> > - John
More information about the cctech