11/23 clock issue
holm at freibergnet.de
Thu Feb 5 14:08:15 CST 2015
Noel Chiappa wrote:
> So I'm debugging a dead PDP-11/23 board (M8186). The first thing I check is
> the clock; specifically the output of the first stage buffer-inverter (pin 16
> of E4, a 74S240, upper right corner of page 2 of the prints), which is
> distributed to a number of places. Nada. Totally flat-lined. So I checked the
> input (pin 4), and it's sitting at about 2V. Also flat-lined. This does not
> seem good... :-)
> So here's my question: what's the likely fault here? The only thing upstream
> of that gate is the 13MHz crystal itself. So the fault has to be either the
> crystal or the S240 (which seems to be some sort of octal 3-state inverting
> buffer). Any guesses as to which?
> As usual, thanks in advance for any help!
Hmm.. it looks to me as if the Board is missing the jumper W1 and the clock
is disabled. Look at this website (mot mine)
The jumper next to the crystal can seems to connect the clock from the
crystal oscillator to the 74S240. check the clock on both posts of W1.
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
More information about the cctech