IBM-11 Card Punch
dave.g4ugm at gmail.com
Sat Feb 21 04:14:06 CST 2015
That's nice. Seems real familiar even though after university I seldom used
one. My cards were usually punched for me from a coding sheet...
... but I did use a hand punch as you say for quick corrections. There must
have been so many of the 029 made, yet so few survive...
The room where these tqo are, I am sure hel about a dozen...
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Marc
> Sent: 21 February 2015 10:02
> To: cctalk at classiccmp.org
> Subject: RE: IBM-11 Card Punch
> Great work and cute card punch! Some similarly gifted folks at CHM are
> rebuilding an IBM 01 right now, and it's equally cute and minimalist and
> proof. They tell me it's how you'd re-punch a bad card in a hurry in the
> of a jammed job.
> I can't resist a shameless plug at my own 029 restoration. Machine
> and hauling back from Kansas to California courtesy of Carl Claunch, who
> been busy since getting the IBM 1130 (and own 029) he brought back into
> action. But this extra 029 gave me a satisfying, if modest, first electro-
> mechanical restoration project, from nothing working at all to full up.
> On Fri, Feb 20, 2015 at 6:10 AM, Dave G4UGM <dave.g4ugm at gmail.com>
> > Folks,
> > Some time ago I bought an IBM Model-11 electro-mechanical punch on E-
> > It
> > was in a bit of a mess as someone had partially dismantled it and not
> > re-assembled it properly. It was also missing a couple of the
> > operating buttons. I have had some replacement parts made, and
> > re-assembled it properly. It now works reasonably well. I have made a
> > short video of it operating here:-
> > http://youtu.be/ogplYeEYzu8
> > Hope you enjoy this.
> > Dave Wade
> > G4UGM
More information about the cctech