PDP8/e front panels.

Rod Smallwood rodsmallwood52 at btinternet.com
Sat Jun 6 16:38:18 CDT 2015

£65.00 (Delivered)  or will swap + cash  for one or more of M833, M8340, 
M8341, M8300 or Top Connectors

Photo attached  (Real thing is much sharper)

On 06/06/2015 21:48, Dave G4UGM wrote:
> Rob,
>   How much in the UK
> Dave
>> -----Original Message-----
>> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Adrian
>> Stoness
>> Sent: 06 June 2015 14:39
>> To: General Discussion: On-Topic and Off-Topic Posts
>> Subject: Re: PDP8/e front panels.
>> pic?
>> On Sat, Jun 6, 2015 at 5:13 AM, Rod Smallwood
>> <rodsmallwood52 at btinternet.com
>>> wrote:
>>> Hi All
>>>            I have recently produced a number of high quality custom
>>> PDP8/e front panels.
>>> They are full size reproductions of the original. The production
>>> methods are exactly as used in circa 1971.
>>> They are not photographs. The front has the two colours plus the white
>>> each done with its own silk screen and the back has the intense black
>>> with the clear circular areas for the lamps to shine through. The inks
>>> were matched and made to order. The acrylic blanks with the cutouts
>>> for the keys were also a custom order.
>>> I did the artwork, The four screens were made and the printing done by
>>> two young ladies with very good graphic arts skills at 'Squegee & Ink
>>> Ltd'  local to me here in Newbury UK. I have some photos but they do
>>> not do justice to the pin sharp lines and intense colours.
>>> The panel fits the bezel and the switches on the key + lamps board line up.
>>> I have a few to sell and can do more if needed.
>>> Due to the custom production they will not be low cost ($95.00 +
>>> shipping from UK)
>>> If you are interested I'll send you a picture. My photo skills are not
>>> that good.
>>> Rod Smallwood

More information about the cctech mailing list