Looking for PDP-11/03 front bezel (2U high)
jacob.ritorto at gmail.com
Wed Mar 11 07:30:16 CDT 2015
I have one that I don't wish to part with, but in the name of pdp11
brotherhood, let me know if nothing else turns up and I'll reconsider.
On Tue, Mar 10, 2015 at 9:01 PM, <steven at malikoff.com> wrote:
> Hi all,
> I'm looking for the front panel for a 19" 2RU (3-1/2") high four-slot
> PDP-11/03-KA, with a rectangular hole for the three switches. Looking at
> photos on the web, some appeared to have badges and some didn't, is that
> the case?
> I've not much to swap in my 'stash' except some old Terak Qbus cards and a
> hex-height Unibus M7234 timing board from an 11/40, of unknown working
> condition so I'm happy to Paypal if you had one.
> Thanks for any help - I recently joined this list and the posts I've seen
> so far are really interesting.
> Steve Malikoff.
More information about the cctech