Qbus split I&D?

Ethan Dicks ethan.dicks at gmail.com
Mon Mar 16 09:54:53 CDT 2015


On Mon, Mar 16, 2015 at 10:16 AM, Roe Peterson <roeapeterson at gmail.com> wrote:
>> I have run 2.9BSD on a real 11/24 (F-11, no split I&D).
>
> Thats what I gleaned from comments in the unix faq.  I am going to try installing 2.9 on my 11/23+ and see how far I get.

What disk controller do you have?  That's the biggest issue.

> Can you recall if anything oddball was needed to install it on the 24?

Nothing oddball except I had to have the right type of tape controller
to boot my install tapes (MS vs MT) and I had to have enough storage
on a supported controller.  There was no MSCP support for 2.9BSD in
those days.  There are modernish patches now.  I did my install onto a
pair of RL02 disks (because I didn't have an RK07).  You will need
more than 10MB if you want to rebuild the kernel, but you can put the
install kernel on a 10MB disk and noodle around.  ISTR there's support
at install time for a number of types of system disk, but RK05 was now
too small.  There are also 3rd-party ESDI and SMD controllers that
would work.

-ethan


More information about the cctech mailing list