Qbus split I&D?

Johnny Billquist bqt at update.uu.se
Tue Mar 17 15:17:03 CDT 2015


On 2015-03-17 20:27, Paul Koning wrote:
>
>> On Mar 17, 2015, at 3:03 PM, Christian Gauger-Cosgrove <captainkirk359 at gmail.com> wrote:
>>
>> On 16 March 2015 at 23:42, Eric Smith <spacewar at gmail.com> wrote:
>>> Not including parity or ECC, it takes two devices to fill the entire
>>> 4MB address space of the PDP-11/70. Either parity or ECC will require
>>> another one additional device, which won't be fully utilized.
>>>
>>> Ordinary SRAM is cheaper, but $110.16 for enough RAM chips to max out
>>> a PDP-11/70 doesn't seem all that expensive, unless you're comparing
>>> to DDR SDRAM DIMMs for PCs.
>> True, SRAM would be cheaper, and you can find faster SRAM and DRAM
>> than the currently available MRAM (if I recall correctly). But then
>> you lose the benefits of MRAM in the first place: It's non-volatile,
>> like core memory, and doesn't need battery backup (as you'd need if
>> you wanted to make SRAM "non-volatile").
>
> MRAM is non-volatile, sure.  I’m not sure its write limit is high enough to be used as a substitute for main memory.  In any case, what PDP-11 operating systems use the non-volatility of memory?  I know of one: RSTS-11.  But RSTS/E dropped that (it reboots on powerup instead).  That makes sense, given that semiconductor memory appeared fairly early in the PDP-11 product life, and none of that came with battery backup.  In other words, only some of the models in some configurations offered non-volatile memory, which made it fairly uninteresting for operating systems to support.

RSX supports suspending on power fail, and resume at power on...

	Johnny



More information about the cctech mailing list