Opening a DECserver 90M External PSU
robert.jarratt at ntlworld.com
Fri Oct 16 17:35:39 CDT 2015
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Peter
> Sent: 16 October 2015 22:47
> To: General Discussion: On-Topic and Off-Topic Posts
> Subject: RE: Opening a DECserver 90M External PSU
> Robert Jarratt wrote:
> > I tried to pry mine open, but it seemed that if I kept going I would
> > end up damaging it more than I would like. Do you have a picture of
> > the opened casing I could see? That would help me to see how best to
> Here you go:
> There was a row of locating pegs on each side of the lid (or base,
> the way you look at it). The row on one side all broke off at the half
> with their other halves remaining stuck to the larger part of the box.
> They all remained intact on the the other side. I don't recall but the
> broke may have been on the side I managed to separate first.
> Peter Coghlan.
Thanks very much for this. Interesting that there is a fuse inside. You
would think the casing would be designed to allow the fuse to be replaced
More information about the cctech