Model 152 PSU dummy loads - Re: NeXT Cube - powers on briefly then off again
archer174 at gmail.com
Mon Oct 26 12:03:20 CDT 2015
I'll try to post some photos in a week or 2. Rob has asked me to make some
internal load boards for him so I can show more details while I'm at it.
The bulb is the best option in my opinion and seems to work just fine
without additional cooling in the cube.
On Mon, Oct 26, 2015 at 6:43 AM, Toby Thain <toby at telegraphics.com.au>
> On 2015-10-26 1:02 AM, Brian Archer wrote:
>> Even a 10W resistor will get really hot. I embed two 5W resistors into a
>> pentium class CPU cooler for a good compromise on space/thermal concerns.
>> You can see a pic on my site here:
> Hi Brian
> I did see your mod while looking around for info.
> I'd prefer not to mod the soundbox so my options seem to be your internal
> backplane load board (
> ) or maybe a small load board inline to the monitor cable?
> It looks like ambient cooling is sufficient for the version shown here?
> Thanks very much for the excellent info you've posted so far!
> Internal to the cube, I've found using a 5W appliance bulb to be the
>> Brian Archer
More information about the cctech