MITS Altair 8800b switches needed

drlegendre . drlegendre at gmail.com
Sun Sep 6 15:21:54 CDT 2015


Since Erik brought it up..

I could also use a couple switches, but in my case they are for an 8800A
model. (Well, it's sort-of a 'B' now as it was upgraded to the 'B' power
supply, but it still has the original 'A' type D/C board).

Like the 'B' it uses mostly Mom-Off-Mom mini-toggles, with panel mount
bushing, and the long solder terminals that solder directly to the PCB (not
the small eyelet type). But the handles are the standard mini-toggle bat
handle - not the flatted paddles Erik describes.

Any leads, feel free to mail me off-list. Thanks!

-Bill

On Sun, Sep 6, 2015 at 1:13 PM, Erik Klein <classiccmp at vintage-computer.com>
wrote:

> I am desperately seeking NOS, working pulls or accurate replacement
> switches for my MITS 8800b.
>
> These are flattened paddle switches, both ON-OFF and MOM-Off-MOM type.
> SPDT, Panel mount, solder post with a 15mm actuator.  This last part is the
> pain as everything I've found is 10mm or less.
>
> I've checked every online source that I know of plus all of the local
> electronics and surplus shops with no luck.
>
> I'm sure someone here has a stash or knows someone who does.  I need at
> least one of each type but would prefer a few more as I do have a few
> marginal switches to replace if I can.
>
> I'd even buy a complete 8800b D/C board if that's what it took.
>
> Please email me at my webmaster@ "vintage-computer.c0m" address if you can
> help.
>
> Thank you!
>
>
> --
> Erik Klein
> www.vintage-computer.com
> www.vintage-computer.com/vcforum - The Vintage Computer Forums
> marketplace.vintage-computer.com - The Vintage Computer and Gaming
> Marketplace
>


More information about the cctech mailing list