wulfman at wulfman.com
Sun Sep 6 19:29:15 CDT 2015
They do not make bipolar proms any more.
you can find them on ebay sometimes
some functions can be emulated by fast pals.
but not code storage.
Old arcade games use them for all sorts of things.
some old arcade game repair sites also sell the ICs
On 9/6/2015 4:38 PM, Marc Verdiell wrote:
> Jay, Mike, John,
> Thanks for the helpful information. It just dawned onto me that these were
> "write once" PROMs, not modern EEPROMs. Duh. So you get one shot at doing it
> The Data I/Os on ebay seem to be quite a bit more than $100 right now, I'll
> keep looking. I guess none of the modern ebay Chinese ones would do? Also
> where can you get the blanks? Any modern equivalents here too?
> Jay West wrote:
> The Data I/O 29B works perfectly for those old fusable link proms.
> John Robertson wrote:
> One can pick up a Data I/O 29B and Unipak II off eBay starting around
> $100USD (ish). There is a very good support group on yahoo groups:
> Mike Loewen wrote:
> I used a Data I/O 29B programmer to burn the PROMs, with a Unipak 2B.
> The blank PROMs were variously Signetics N82S141, MMI 6341-1 and National
> 74S474. Along with the 12821A HP-IB board, you also need a Boot Loader
> PROM, 12992H (12992-80004). The boot loader PROM is a Signetics N82S129 or
> equivalent. For installation information about the firmware PROMs, see
> manual 12791-90001 (HP 1000 M/E/F-Series Firmware Installation and
> Reference Manual). For boot loader information, see manual 12792-90001 (HP
> 12992 Loader ROMs Installation Manual).
The contents of this e-mail and any attachments are intended solely for the use of the named
addressee(s) and may contain confidential and/or privileged information. Any unauthorized use,
copying, disclosure, or distribution of the contents of this e-mail is strictly prohibited by
the sender and may be unlawful. If you are not the intended recipient, please notify the sender
immediately and delete this e-mail.
More information about the cctech