Are old SCSI tape drives not all created equal?
js at cimmeri.com
js at cimmeri.com
Fri Aug 19 11:24:28 CDT 2016
On 8/17/2016 6:17 PM, Chuck Guzis wrote:
> On 08/17/2016 02:59 PM, js at cimmeri.com wrote:
>> Hi, Chuck. Excellent question -- and they do respond per your
>> minimum, but beyond that, I'm not sure. When a drive wouldn't work,
>> I only thought to check for unit ready, unit identify, and to see
>> what would happen with a START or STOP unit command.
>> Even the Teac MT-2ST would respond to those 3 (for the START or STOP
>> command, it retensions the entire tape). Interestingly, the Teac
>> also doesn't provide a unit name like all the others do eg. "ARCHIVE
>> PYTHON etc..." It just shows up as a blank during bootup on a PC
>> with an Adaptec SCSI card. This lack of name seems to make it
>> invisible to Windows (XP) ASPI.
>> I have MSDOS software than allows one to issue direct SCSI commands,
>> but doing that is beyond my present know-how.
> Well, that's all good. SCSI tape covers a lot of ground--from 9 track
> 1/2" open-reel drives and includes various technologies, from simple
> DCxxx QIC carts, to DDS, SLT, DLT... All have their peculiarities.
> For example, some permit rewriting of blocks; others put this strictly
> off-limits. Lots of features are vendor-optional, which include things
> such as partitioned data sets and robot auto-loaders. Read-after-write
> verification is optional (but is a good thing, particularly if the drive
> firmware includes recovery by erase-and-rewrite.
> Linux can be pretty decent about a one-size fits all and has several
> optional packages that people have submitted, including the st toolkit.
> If you can program C, I might have some DOS I/O library functions that
> may interest you.
> Generally speaking, the "safe, always there" commands are INQUIRY
> (0x12), TEST UNIT READY (0x00), REWIND (0x01), REQUEST SENSE (0x03),
> READ(6) (0x08), WRITE(6) (0x0a) WRITE FILEMARKS (0x10), MODE SENSE
> (0x1a), MODE SELECT (0x15), UNLOAD (0x1b) and perhaps SPACE (0x11).
Where might I find information on how to form SCSI command data blocks so as to try the above commands? I sent just an "01" to the TEAC MT-2ST, and it did rewind.. but did not react to any of the other above commands just by sending single bytes.
Oddly, the OnStream drive did *not* accept an 01 command.
> Of course, commands such as MODE SENSE, MODE SELECT and REQUEST SENSE
> have variable implementations. Status for a given condition isn't
> guaranteed to be the same across devices; for instance on the Qualstar
> SCSI half-inch drives like to return a record of zero length instead of
> setting the "filemark hit" status on a read operation.
> Generally speaking, however, as long as you stick to the above list and
> the simplest options, you'll be good with anything.
More information about the cctech