looking for keytronics keyboard pad replacement kit
billdegnan at gmail.com
Mon Dec 12 07:49:57 CST 2016
One other thing....my use of the term "pad"...There is the metallic disk
"pad" that goes on top of the foam pad. I should have said metallic disk
when referring to the contact that sits on top of the foam pad.
On Mon, Dec 12, 2016 at 8:47 AM, william degnan <billdegnan at gmail.com>
> Upon closer inspection, these are pads only. I am looking for the pads
> with new metallic contacts attached, too. The metallic pads also decay and
> need to be replaced. I have been able to re-use some but they're never
> 100% good. The surface gets coated with something that causes them to
> loose the desired properties and cleaning does not always help. I have a
> punch to create my own pads, and I *could* make metallic pads from a space
> blanket or similar but I was hoping to find pre-made-ready-to-use
> replacement pads instead. I could use 4 sets.
> On Mon, Dec 12, 2016 at 6:51 AM, william degnan <billdegnan at gmail.com>
>> Thanks. I was searching with the wrong terms.
>> Bill Degnan
>> twitter: billdeg
>> On Dec 12, 2016 1:19 AM, "Peter Cetinski" <pete at pski.net> wrote:
>>> > On Dec 11, 2016, at 5:17 PM, william degnan <billdegnan at gmail.com>
>>> > There was a seller on ebay who had a set of the pre-made keyboard key
>>> > for sale...anyone here selling these? Yes I could make my own, I have
>>> > through the process, but I'd like to buy a set or two as I have a few
>>> > keyboards to repair. it's a time consuming process.
>>> > Thanks in advance.
>>> > Bill
>>> He’s still out there
More information about the cctech