Wanted: Specific Mallory cap...

wulfman wulfman at wulfman.com
Wed Jan 6 12:35:57 CST 2016

   supply a picture if you can

On 1/6/2016 10:52 AM, Bill Sudbrink wrote:
> Hi all,
> I am in the process of restoring/recreating a linear
> PS as part of a project and I would like to use the
> original parts if possible.  I'm looking for six
> Mallory axial electrolytic capacitors.  The physical
> dimensions are 11mm in diameter by 44mm in length.
> They have a clear plastic wrap, so the aluminum
> silver color shows through.  The printing on them
> goes around the circumference (not end to end) and
> reads:
>    +-M-+
> 2000 MF 10 V
>  20-48923
> Electrically, they are (were) 2000uf, 10 volt.  My
> bet is that these are mil-spec versions of Mallory's
> TT10X2000 capacitor.  They physically match some
> Mallory TT15X1000 caps that I have in my parts box.
> I've been "beating the bushes" for a while now with
> no luck on the "20-48923" part number.  I've also
> contacted all of the web site owners that claim to
> have TT10X2000s.  They have all come back with "well,
> we don't actually seem to have that part after all".
> If anyone has either of the above, I'll pay a good
> price for them.  They don't have to be in operational
> condition electronically, I'll "restuff" them if
> necessary.
> Thanks,
> Bill Sudbrink

The contents of this e-mail and any attachments are intended solely for the use of the named
addressee(s) and may contain confidential and/or privileged information. Any unauthorized use,
copying, disclosure, or distribution of the contents of this e-mail is strictly prohibited by
the sender and may be unlawful. If you are not the intended recipient, please notify the sender
immediately and delete this e-mail.

More information about the cctech mailing list