BC11A paddle boards
ethan.dicks at gmail.com
Tue Jan 26 17:03:56 CST 2016
On Tue, Jan 26, 2016 at 5:46 PM, Guy Sotomayor <ggs at shiresoft.com> wrote:
> I just received the first of the BC11A paddle boards (so that I can now create my own BC11A cables).
> For those who’d like to know, I probably will not be making a production run of these boards unless I get a *lot* of interest (100 boards or so). If you want some, let me know and if I get enough interest, I’ll do a production run.
Considering DEC did something like this for the DWBUA, but with 4
30-pin cables (by necessity because of the BI backplane), is 2x60 pins
more cost-effective than 4x30? Mostly, I'm curious about how much
60-pin ends cost and the difference in cost between 2 lengths of
60-pin ribbon cable vs 4 lengths of 30-pin cable. The copper cost is
the same, but I wasn't sure what the current cost-per-foot is for
ribbon cable. I haven't bought a reel of it in 30 years, but I do
recall that 40 pin seemed to be more expensive than 4 times the length
of 10-pin, for example (since we used both where I worked in the 80s).
Either way, these days, the cost of 2x60 vs 4x30 is probably minor
compared to the fab costs of a "large" PCB with gold fingers. I'd be
curious to know how much a 10' BC11A-work-a-like will run, but I'm
vaguely interested in some pairs of boards. I do have plenty of
Unibus machines and RK05s, most with vintage cables, but I'm sure
several of them have crimps and dings and might fail close inspection.
More information about the cctech