Can Windows 98SE run on an Intel I7 with SATA hard drives?
cclist at sydex.com
Fri Jan 29 11:39:58 CST 2016
On 01/29/2016 08:04 AM, js at cimmeri.com wrote:
> The one thing I'm not seeing mentioned in re VirtualBox is that what
> if you have a legacy Win 98SE system with hardware in it, like a GPIB
> card or sound card? Or if you have software that talks to hardware
> via serial or parallel ports eg. eprom burners, Zector ZVG vector
> graphic driver for MAME, etc.
As others have mentioned, the best approach is to keep systems that
support what you need "just in case". In my case, some of the hardware
is of my own design and construction--and employs the ISA interface.
Sure, it's possible to redesign the hardware and write some new drivers,
but for the frequency of use, it's just not worth it. So I keep at
least one operating 8088, 80286, 80386, 80486, P1, P2 and P3 system around.
On many of my systems, DOS 7.x (Win98SE real-mode command prompt) is
also useful. Real MS-DOS also for the non-Win 9x capable systems.
It's not a big thing--just pull an appropriate machine out of the stack,
hook it up and you're off and running.
But VB is very useful in lots of cases.
In other words, I don't think there's a "one size fits all" solution.
More information about the cctech