VR241 Stray Wire

tony duell ard at p850ug1.demon.co.uk
Sat Jun 25 11:21:22 CDT 2016


> Yes I have your schematic and I had looked to see if I could see the wire
> but I had failed to spot it. Thanks for pointing it out. My worry was simply
> that I had not noted where it connected, but it seems it wasn't connected in
> the first place.

To prevent it shorting, stick it onto the pin labelled 'S'. If the pins
aren't labelled, do a contiuity test between the socket end of the wire
and each of the pins, it should be a dead short to one of them and an
open circuit to the other. Stick it on the one it seems to be shorted to.

-tony


More information about the cctech mailing list