PDP-11/05-NC with M9301?
billdegnan at gmail.com
Thu Mar 17 13:26:39 CDT 2016
On Thu, Mar 17, 2016 at 1:59 PM, Mattis Lind <mattislind at gmail.com> wrote:
> 2016-03-17 18:50 GMT+01:00 Paul Birkel <pbirkel at gmail.com>:
> > 11/70: M9301-YC -- E-F Slot #1. It's specially wired like everything
> > else in Slot #1 through Slot #39. SPC doesn't start until Slot #40.
> > goes in Row A-B Slot #44.
> > KW11 (clock) goes adjacent in Row D Slot #1.
> > Row C Slot #1 is empty.
> > Rows A-B Slot #1 take the FP & CP maintenance modules, if in use.
> I just found a rather unfocused picture of the backplane of a 11/70. And my
> guess was completely wrong. As you wrote it is in slot 1 EF. And the M9302
> in the last slot as normal.
I took a look at my 11/40, it has a 9312 in pos 1/2 in the middle of the
2nd/rear of two backplanes here:
With this arrangement I can boot into the console monitor installed on the
Twitter: @billdeg <https://twitter.com/billdeg>
Youtube: @billdeg <https://www.youtube.com/user/billdeg>
Unauthorized Bio <http://www.vintagecomputer.net/readme.cfm>
More information about the cctech