TU58 yet one more time.

Mark J. Blair nf6x at nf6x.net
Sun May 29 13:34:52 CDT 2016


My first attempt to use silicone tubing to repair my TU58 rollers was also unsuccessful. Maybe the material I used is too soft? Your experience suggests to me that I should hook up an oscilloscope to measure bit timing, and then adjust the roller composition and diameter to arrive close to the correct bit length.


-- 
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/



More information about the cctech mailing list