jnc at mercury.lcs.mit.edu
Wed Sep 7 12:18:34 CDT 2016
From: Paul Koning
> Some IBM systems ... have a "2315" drive which is an RK05.
Yeah, I think that was the original source of these packs. The Diablo 30/31
drives (used on the RK11-C controller before the RK05 was created) were
designed to use 2315 packs.
> From: Tony Duell
> My intention was to put the hub on a spare spindle .. put the platter
> on, turn it round by hand and use a lever-type dial gauge to get
> minimum run-out.
One of the people I buy PDP-11 parts from reports that he actually did this
(using the exact procedure you describe) BITD. Apparently there's some
multi-platter pack that has the same exact platter as the RK05 (2315) pack,
and he had some damaged RK05 packs, and moved platters from the bad
multi-platter pack to the RK05's.
More information about the cctech