bill.gunshannon at hotmail.com
Sun Aug 6 09:05:36 CDT 2017
I have found that metal PS/2 keys work as well, if your are not insistant
on historical purity. I, personally, have always prefered functionality over
From: cctalk [cctalk-bounces at classiccmp.org] on behalf of Ian S. King via cctalk [cctalk at classiccmp.org]
Sent: Sunday, August 6, 2017 2:00 AM
To: Rod Smallwood; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: pdp-8/e restoration.
Those keys are common across nearly all DEC machines prior to the ones that
started using plastic keys. XX2247 is the code. -- Ian
On Sat, Aug 5, 2017 at 10:29 PM, Rod Smallwood via cctalk <
cctalk at classiccmp.org> wrote:
> Hi List!
> Movin right along.
> Programmers console now properly attached to light screening bar.
> Front panel and bezel on. Needs a bit more work.
> Not as secure or as straight as I would like.
> Then there's the key lock problem.
> Its in the off position and of course I don't have the key.
> So I cant fit that just now.
> Took power supply out. Changed mains cable as it was only a foot long.
> Soldered to the circuit breaker was a factory standard would you believe.
> Power supply back in. Connect up. Power on. Load address 0000, press CLEAR
> and CONT.
> Test program still in core. Started right up.
> To-days task get the serial I/O going.
> Rod in Restore Mode
> Wanted one pdp-8/i rocker switch leaver to copy.
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>
Dissertation: "Why the Conversation Mattered: Constructing a Sociotechnical
Narrative Through a Design Lens
Principal Investigator, "Reflections on Early Computing and Social Change",
UW IRB #42619
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
More information about the cctech