11/04 Project

John Welch jcwelch at hal-pc.org
Thu Dec 14 09:46:07 CST 2017


I have it working now.  I had to go into XP settings for the comm port.

@L<spc>777<cr>

@E<spc><cr>

000777 173200 165212 000777

So, next is to hook up to the RL02.  I will start a new thread for that.


On 12/14/2017 7:23 AM, Noel Chiappa wrote:
>      > From: William Degnan
>
>      > 1) the console rom does not go in any of the 4 bootstrap slots, these
>      > should be empty for now. There is a special console rom slot.
>
> Just to clarify, by "slot", you don't mean 'backplane slot', you mean 'socket
> (on the card)', right?
>
> Also, note that the console/diagnostic ROM is a different size (bit-wise; I'm
> not sure about the physical package) from the bootstrap ROMs.
>
>      > 6) possibly the only switch to worry about now is the power on auto
>      > jump to console switch.
>
> I'd leave that, too, until we get the software console to run when started
> manually - at the moment, the ROM's not working, so that switch is irrelevant.
>
> 	Noel

-- 
Sincerely,
John Welch
281-353-4706 Home
713-725-7017 Cell
:qw



More information about the cctech mailing list