Need manual for a floppy drive...
cclist at sydex.com
Sun Jan 29 13:23:01 CST 2017
On 01/29/2017 08:28 AM, geneb wrote:
> I've got a Panasonic JU-455-5 AAG (5.25, 360K) that I'd like to use
> in a Kaypro 4. I've worked out the configuration of the drive based
> on a snippet of info on the net that had some jumper settings, but I
> can't get the activity light to operate. I've set the configuration
> to use the light when either motor on is detected, or the drive
> select, but neither seem to work. I figure a "real" manual on the
> drive would help.
> Note that the drive seems to operate without issue other than the
> drive light. Boots, etc.
In addition to what Fred mentioned, there are some drives that employ
the "in Use" line to allow the host to illuminate the drive. I've got a
couple of YE Data drives that behave in this manner. On 8" drives, this
corresponds to "Head Load". It's pin 4 on the interface and is
active-low. You could probably tie it to the appropriate "drive select"
More information about the cctech