Need manual for a floppy drive...
cclist at sydex.com
Mon Jan 30 11:07:49 CST 2017
On 01/30/2017 08:51 AM, geneb wrote:
>> According to the schematic, in the DS position, the LED is not
> Well like I mentioned previously, the logic board in the Panasonic
> drive looks *nothing* like the one in the Shugart manual. :)
Well, as nearly as I can tell with mine. If you set the jumper to UA
and ground pin 4, (no other signals present), the LED will come on.
That is, the connection to the IU pin in that case is very simple.
More information about the cctech