Logic Analyser Advice
robert.jarratt at ntlworld.com
Sun Mar 12 05:00:06 CDT 2017
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of William
> Sent: 10 September 2016 02:41
> To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>;
> rob at jarratt.me.uk
> Subject: Re: Logic Analyser Advice
> On the 1630 series, the active logic is all in the pods. The connectors on the
> flywires are proprietary HP parts with a mechanical latch to lock them into the
> pods. but I've seen multiple mentions in discussion groups of folks using stock
> Molex connectors to connect to the pods.
Some time ago I asked about connectors for the pods on a HP 1630G Logic Analyzer. The reply above mentioned molex connectors as an alternative. I have been having a bit of a look around but I don't seem to be able to find anything suitable. Does anyone know what might be suitable?
More information about the cctech