Re: Extracting files off “unknown” 8 inch disks. Any thoughts…
allisonportable at gmail.com
Fri May 5 10:13:39 CDT 2017
On 05/04/2017 07:01 PM, Rich Alderson via cctalk wrote:
> From: Terry Stewart
> Sent: Thursday, May 04, 2017 2:41 PM
>> Just tying up some unfinished business. Right at the beginning of this
>> thread I said...
>>> Guys in the building next door to me (a Science lab) have found some 8 inch
>>> floppy disks. They want to see what’s on them, or at least to archive them.
>>> They have no idea what machine these disks were used with, or the software
>>> was used to write the files. They may be CP/M, or some other format
>> It turns out these disks are from a VAX machine. Assuming the OS is VMS, I
>> scoured the Internet for something that might read them.
> Stop there.
> 8" floppies on a VAX are more likely to be an RT-11 file system for the front
> end PDP-11/03 than anything else you can think of.
> The rest is left as an exercise for the reader.
Not absolutely true! THe boot system is a PDP-11, however the VAX can
have a Unibus or QBUS (depending on flavor) where a RX02 controller can
The likely file system is FILES-11. But can be "othter", especially if
its a unix machine.
> Rich Alderson
> Vintage Computing Sr. Systems Engineer
> Living Computers: Museum + Labs
> 2245 1st Avenue S
> Seattle, WA 98134
> mailto:RichA at LivingComputers.org
More information about the cctech