HP 3000/37 console

Keven Miller(3k) kevenm at 3kranger.com
Tue May 8 08:15:47 CDT 2018


As Ed mentioned, I believe the CISC machines will need the ENQ/ACK.
I thought that speed-sense was only on the CR. But the ENQ/ACK will happen
every 80 chars sent.

I think you can wait on it because it will timeout, and continue.
Or when output pauses, you could type Control-F, as I recall.

If you cannot get your hands on Reflection ( 
https://www.microfocus.com/products/reflection/ )
(took me a moment to find it, now that microfocus controls it)
or Minisoft Win92/Secure92  (www.minisoft.com),
or an hp terminal, you could try QC-Term.

http://www.3kranger.com/Atmar/AICS_qcterm.shtm

Keven Miller


----- Original Message ----- 
From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Mon 07 May 2018 09:36 PM
Subject: HP 3000/37 console


>
>    Does anyone know if a non-HP terminal will work as the console for a HP 
> 3000 Series 37?  The power-on self-test uses ENQ/ACK to speed sense, but 
> the manual also implies that it will sense speed from a <CR>.  On my 37, 
> the TIC self-test passes up to the point where it talks to the terminal, 
> but fails to to speed sense.
>
>
> Mike Loewen mloewen at cpumagic.scol.pa.us
> Old Technology http://q7.neurotica.com/Oldtech/
> 



More information about the cctech mailing list