HP 3000/37 console
kevenm at 3kranger.com
Tue May 8 08:21:26 CDT 2018
Another quick thought,
Putty ( https://www.putty.org/ )
has serial mode, and an AnswerBack for ENQ (Control-E).
You could try using that, although HPterm escape sequences will not work.
----- Original Message -----
From: "Mike Loewen via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Mon 07 May 2018 09:36 PM
Subject: HP 3000/37 console
> Does anyone know if a non-HP terminal will work as the console for a HP
> 3000 Series 37? The power-on self-test uses ENQ/ACK to speed sense, but
> the manual also implies that it will sense speed from a <CR>. On my 37,
> the TIC self-test passes up to the point where it talks to the terminal,
> but fails to to speed sense.
> Mike Loewen mloewen at cpumagic.scol.pa.us
> Old Technology http://q7.neurotica.com/Oldtech/
More information about the cctech