desoldering (was Re: VAX 9440)

Ed C. edcross at gmail.com
Tue Nov 13 17:37:58 CST 2018


I have the combo unit including solder. I do not have any other experience
with any high-end ware but I can say that this unit does all I need and
does it well.

On Tue, Nov 13, 2018 at 7:17 PM Chuck Guzis via cctalk <
cctalk at classiccmp.org> wrote:

> On 11/13/18 7:38 AM, Mark J. Blair via cctalk wrote:
>
> > Instead, I use two pencil-type irons, one in each hand, working under
> > a stereo microscope. The tips are much better, and manipulating each
> > tip independently provides great control of what's going on. Only
> > drawback is that if you want to use a fancy, expensive iron, now you
> > get to buy two of them. If you're tempted by a soldering station with
> > two or more outputs, make sure that it can drive both simultaneously.
> > There are dual-output stations that have two outputs but can only run
> > one at a time, as well as ones which can drive two irons at once.
>
> After seeing the video on the ZD-985 some years ago on Dave's EEVBlog:
>
> https://www.youtube.com/watch?v=Ft50m8UU5WQ
>
> I've been wondering if it's a worthwhile tool.  Does anyone have one of
> these things?
>
> --Chuck
>
>


More information about the cctech mailing list