[cctalk] Looking for front panel switch

Gregory Beat w9gb at icloud.com
Sun Oct 6 13:30:12 CDT 2019


Many of the classic Rocker & Lever Actuator switches from the 1960s & 1970s were discontinued, due to industry consolidation (M&A) in 1990s and the convert or obsolete decisions (RoHS compliance), a decade later.
This likely means you will need to “adopt” to current offerings == OR == 
plow through remaining discontinued surplus parts.  
For example, Mendelsons only lists about 5% of their Dayton warehouse inventory.
https://meci.com/electronics/parts/switches/rocker.html
==
These Large Actuators are sometimes referred to as Wide Paddles. 

C&K refers to this PC board mounting as the V3 Style, VERTICAL MOUNT, V-BRACKET
It is still offered for the C&K “T-series” Subminiature Toggle Switches.
https://www.mouser.com/datasheet/2/60/ttoggle-1324393.pdf

C&K Selector Guide (current production models)
http://www1.futureelectronics.com/doc/C%20-%20K%20COMPONENTS/D102J12S115DQA.pdf

NKK (Japan) refers to this mounting style as Bracket & Reinforced Bracket for their “M-series” Miniature Rocker Switches. 
You purchase the Actuators separately, for the pivot — like your example.
https://www.mouser.com/datasheet/2/295/MrockersSnapin-29723.pdf

gb
===
From: "Charles" <xxxx at centurytel.net>
To: "cctalk digest" <cctalk at classiccmp.org>
Subject: Looking for front panel switch

At some earlier time, I'd either lost (or cannibalized for a PDP-8) 
one of the switches. Subminiature SPDT toggle switches are readily available 
from C&K and Mountain, but I cannot find one with the four-pin mounting 
bracket and the "ears" to hold the paddle lever pivots. Attached is a 
picture showing part of the front panel.

https://imgur.com/bIrmZt7

Does anyone have a matching switch they're not using? 
I have a spare black lever, but it's supposed to be blue for that nibble which would be even better ;)
Thanks for any help.
==


More information about the cctech mailing list