DECMATE (VT-278 model) RX278 Floppy Drive Interface Connector cable wanted

Bill Degnan billdegnan at gmail.com
Wed Feb 19 11:45:12 CST 2020


re-posted with subject

On Wed, Feb 19, 2020 at 12:37 PM Bill Degnan <billdegnan at gmail.com> wrote:

>
>
> On Wed, Feb 19, 2020 at 11:15 AM Ethan Dicks via cctalk <
> cctalk at classiccmp.org> wrote:
>
>> On Wed, Feb 19, 2020 at 5:10 AM Chris Zach via cctalk
>> <cctalk at classiccmp.org> wrote:> Hm. I have the bulkhead 25 pin to 40
>> pin interface thing from an RX02 in
>> > a box, I'm not using it as I am going from the pdp11's RX01 straight to
>> > the drive's controller. That should give you the pinout, want to borrow
>> it?
>>
>> I already sent Bill the pinouts of both ends, but for the benefit of
>> the list archives, the DB25-BERG end is documented at:
>>
>> http://www.pdp8online.com/pdp8docs/rx02pinout.txt
>>
>> -ethan
>>
>
> thanks Ethan...I saw this page but did not recognize that the pins were
> labeled to match what's in the 278 manual. One just has to match the label
> to the pin on the other end.
> b
>


More information about the cctech mailing list