3d modelling software

geneb geneb at deltasoft.com
Mon Aug 23 15:39:39 CDT 2021


On Mon, 23 Aug 2021, shadoooo via cctech wrote:

> Hello Rob,
> FreeCAD is nice for modeling 3D shapes.
>
Not if you've ever used a commercial product that does the same job. ;)

> For 3D printing, depending on the technology of 3D printer, you need to 
> process original model to convert compact sections into hollow honeycomb 
> structure, and add small plastic bars into empty volumes to support the 
> model while it's printed. I'm not expert of this latter procedure and 
> tools.

Dictating the infill pattern of a STL file is *never* the job of the 
drawing tool, it's the job of the slicer being used to turn the STL file 
into gcode.

g.


-- 
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby.  Geeks collect hobbies.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://scarlet.deltasoft.com - Get it _today_!


More information about the cctech mailing list