Motor generator

dave.g4ugm at gmail.com dave.g4ugm at gmail.com
Wed May 5 07:20:59 CDT 2021


> -----Original Message-----
> From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Mark Linimon via
> cctalk
> Sent: 05 May 2021 12:10
> To: Chuck Guzis <cclist at sydex.com>; General Discussion: On-Topic Posts
> <cctech at classiccmp.org>
> Cc: Donald via cctalk <cctalk at classiccmp.org>
> Subject: Re: Motor generator
> 
> On Tue, May 04, 2021 at 10:07:28PM -0700, Chuck Guzis via cctech wrote:
> > "Power for the basic computer consists of one 250 kva, 400 Hz motor
> > generator set.  The motor-generator set has the capability of
> > providing power for the CPU, MCS, I/O and the MCU. The optional memory
> > requires the addition of an 80 kva motor-generator set."
> 
> I'm looking at this RISC-V board sitting here on my desk (with its
"massive" 2-
> inch-long heat sink) and shaking my head at how far we have come.
> 
> mcl

We had a Motor/Generator for our Honeywell L66. Not sure it was because it
wanted US voltages or just for a clean supply
Dave



More information about the cctech mailing list