Welcome to Ram Meenakshisundaram's Transputer Home Page

"…sequential computers are approaching a fundamental physical

limit on their potential power. Such a limit is the speed of light…"

Sundance SMT245 High-speed ST20450 TRAM

Features
Applications
Description

The SMT245 is a size 2 TRAM containing a 32-bit T450 Transputer running at 40 MHz. This transputer provides up to an order of magnitude performance improvement over T425 based designs, and yet remains compatible with the standard TRAM format. The ST20450 features 16KBytes of single cycle internal SRAM. In addition to this, the SMT245 TRAM may be ordered with 4 or 16MBytes of DRAM making it suitable for both low cost embedded applications, and memory hungry image processing applications. Using page mode DRAM permits memory access in two cycles, giving a peak memory bandwidth of 80MBytes/s.

The SMT245 TRAM also contains a 128KByte FLASH EPROM. In embedded applications, this could be used to store bootstrap and program code, allowing the TRAM to boot itself, and any network it is connected to. The EPROM could also be used to store Xilinx FPGA configuration data, which could be accessed using DMA via the expansion connectors.

All the transputers interface signals are brought to two 48-way expansion connectors, which allow custom interfaces, and prototype development to be carried out using this TRAM. This provides a cost effective way to develop new hardware interfaces using a proven ST20450 core processor and memory design.

User Manual & Support Software

This page is copyright ©1995, Sundance Multiprocessor Technology Ltd.