test-drb February 1999

test-drb@ccmp.vtda.org

178 participants
709 discussions

Wanted: Z80 S-100 SBC or Z80 S-100 Slave cards

by dragon＠panix.com

I am primarily looking for some several Z80 S-100 slave cards. Compupro use to sell Z80 slave s100 cards with 64K or 256K of ram and serial port and parallel port. I also understand a one time some use to make S-100 SBC that met all the S-100 spec. So they could run as Temporary Bus Masters (TBM). Thus enabling someone to put up to 16 of them on the same S-100 bus. If you have a few either type you want to sell, e-mail me Michael

27 years, 1 month

DECStuff FS or trade

by emu＠ecubics.com

Hi Bruce, ---------- > From: Bruce Lane <kyrrin(a)bluefeathertech.com> > To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> > Subject: DECStuff FS or trade > Date: Sunday, December 13, 1998 1:20 PM > PDP-11/23+ with the floating point option. Used to live at Fluke Corp., and drive a laser trimmer for printed resistor arrays. Was working when pulled, so it should be OK. You still have this one ? Which one ist it anyway, quad or double ? I got some MS650 boards here ;-)) cheers, emanuel

27 years, 1 month

S100 boards

by edick＠idcomm.com

I don't know that this will settle anything for anyone, but I saw an old ad for the DJ2 just a day or so ago in an old mag and it certainly didn't have any HDD port. It was an FDC. I have a board from Industrial Microsystems which has a SASI port on it. I even have an old 8" HDD which should talk to it. I've never tried them, though. Dick ---------- > From: Huw Davies <H.Davies(a)latrobe.edu.au> > To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> > Subject: RE: S100 boards > Date: Thursday, February 04, 1999 7:47 PM > > At 06:28 AM 04-02-99 -0500, Bob Stek wrote: > > >I've got 50 cents that says the DJ 2D/B is a floppy controller, not a hard > >drive controller! > > I'll increase the bid to 2 Euros :-) My rusty memory reckons that it's a > floppy controller too... > > Huw Davies | e-mail: Huw.Davies(a)latrobe.edu.au > Information Technology Services | Phone: +61 3 9479 1550 Fax: +61 3 9479 1999 > La Trobe University | "If God had wanted soccer played in the > Melbourne Australia 3083 | air, the sky would be painted green"

27 years, 1 month

S100 boards

by bobstek＠ix.netcom.com

>> Andrew Davie[SMTP:adavie@mad.scientist.com] writes: >> >> >S-100 George Morrow Disk Jockey 2D/B >> >> Hmm, 50 pins, could that possibly be a SASI card? >> As in Shugart Associates pre-SCSI bus >> > >No. It's sa1000 series 8" hard disk interface. > >Allison I've got 50 cents that says the DJ 2D/B is a floppy controller, not a hard drive controller! Bob Stek bobstek(a)ix.netcom.com Saver of Lost SOLs

27 years, 1 month

OT - Declaser 1152

by jim＠calico.litterbox.com

Okay, it's not quite a classic since it's only 7 years old, but does anyone know whether the simms inside a declaser 1152 are standard 30 pin mac simms or if they're something wierd? I desperately need to upgrade my old declaser - it keeps running out of ram printing things and Kinkos wants $.49 US per page to print things to their very fast and powerful IBM printer. Alternately does anyone out there happen to have the 2 meg expansion (part number LN07X-UF) for the thing? -- Jim Strickland jim(a)DIESPAMMERSCUMcalico.litterbox.com ----------------------------------------------------------------------- Vote Meadocrat! Bill and Opus in 2000 - Who ELSE is there? -----------------------------------------------------------------------

27 years, 1 month

Need some O.T. help

by gregorym＠cadvision.com

At 02:54 PM 2/4/99 -0800, you wrote: >On Thu, 4 Feb 1999, Tony Duell wrote: > >> Automatic power switches are nothing new. The odd-numbered PERQs (1, 1a, >> 3a) all had software-controlled turn-off. So does the Whitechapel MG1 and >> the Torch XXX. > >And the Apple Lisa. And it too has problems sometimes not allowing you to >power down (you must either unplugged the system or trip one of the two >microswitches that sense whether you opened the front bezel or back access >panel). And the NeXT Cubes. I've never had a problem with the machine hanging when you want to power down. I have however had some involuntary shut downs when the !@#$%^& laser printer comes on to warm up, and blows the breaker on that circuit. :v) Mark > >Sellam Alternate e-mail: dastar(a)siconic.com >--------------------------------------------------------------------------- --- >Always hasslin' the man. > > Coming in 1999: Vintage Computer Festival 3.0 > See http://www.vintage.org/vcf for details! > [Last web site update: 01/15/99] > > >

27 years, 1 month

HP TSB, Docs and O/S

by jlwest＠tseinc.com

So - you're sure you don't want to just give that machine up? <grin>... Just out of curiosity, what modem of disk drive is it? I'll have some docs somewhere for that stuff soon enough. I know I already have all the docs on the tape reader... Jay West -----Original Message----- From: Tony Duell <ard(a)p850ug1.demon.co.uk> To: Discussion re-collecting of classic computers <classiccmp(a)u.washington.edu> Date: Thursday, February 04, 1999 4:50 PM Subject: Re: HP TSB, Docs and O/S >> >> I'm glad I got the first batch of docs for the 2100 stuff. But given that >> the second batch of HP docs which I did not get went so fast, I have to >> suspect there's some other 2100/21MX lurkers on the list :) One of these > >I have a 2100 CPU + paper tape reader + disk drive. The latter takes >RK05-like packs, and is in very poor condition. The whole lot was rescued >just before it became scrap metal... > >Alas I have no docs, and I think I'm going to need a schematic of the >board in the CPU box before I can do much. I have all the CPU boards (but >not the WCS option), 4 sets of core memory (missing one top connector) >and a lot of I/O boards. > >It is very much a 'to be done one day' project. Yes I am glad I rescued >it, but until I get some more info it's going to be sitting in my machine >room... > >-tony > >

27 years, 1 month

Need help on old Tandy stuff -- Allison? Anyone else?

by sinasohn＠ricochet.net

At 10:51 PM 2/1/99 -0600, you wrote: >> Computer (Sharp) or the Model 100 (Kyocera). I'm not sure about the M200, >> but I suspect it might have been made by Kyocera as well. Uncle Roger >> knows more about all of the different Kyocera clones. >I didn't know about the Kyocera connection, however. Interesting.... Tandy may have *made* the m100; Kyocera *designed* it. I think Tandy redesigned it (tweaked it) into the 102; they probably did the design (based on the original Kyocera design) of the 200. FYI, there are 9 versions of Kyocera's design: Kyocera KC-85 TRS-80 Model 100 TRS-80 Model 102 (mostly the same as the 100, only lighter and cheaper) TRS-80 Model 200 (clamshell, with larger screen) NEC PC-8201 (Japanese version, with Katakana? charset in ROM) NEC PC-8201A (American version) NEC PC-8300 Olivetti M10 (American version) Olivetti M10 (Euro version) Not related, but possibly mistaken as such: TRS-80 Model 600 NEC PC-8401A "Starlet" NEC PC-8500 Olivetti M15 I don't know if Kyocera ever came out with anything after the KC85. --------------------------------------------------------------------- O- Uncle Roger "There is pleasure pure in being mad roger(a)sinasohn.com that none but madmen know." Roger Louis Sinasohn & Associates San Francisco, California http://www.sinasohn.com/

27 years, 1 month

MORE!!! FS/FT: HP Documentation

by rigdonj＠intellistar.net

OK I'll join in. Here's my offering: HP 1000 Computers, Hardware Data. 8 1/2 x 11" size, date 5/79. This list ALL the hardware specifications and options for the 2100 M, E, and F series machines. Also all the specs for the memory systems, mainframe plug-ins, Firmware products, microprogramming accessories, Power fail recovery systems, input/output and memory extenders, I/O interfaces, environmental specifications and prodduct support information and finally the complete power specifications and applicability summary. Only VERY interesting trades considered! JOe

27 years, 1 month

Are there any Telex fans out there?

by rigdonj＠intellistar.net

I got a bunch of old disks yesterday. So far I've found some in the CPM 86 format for the PC, Telex CPM format, CPM for the Osbourne 1, 8" soft sectored disks for unknown system and one hard sectored 8" floppy. It looks like many of them came from Telex's office in North Carolina. Many of them look like reports of test on different models of equipment, equipment specifications, etc. A couple look like they have ROM code and different revisions of system software. I need some one that's familar with Telex's products that can tell me what some of these things are. Joe

27 years, 1 month

← Newer
1
...
57
58
59
60
61
62
63
...
71
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb February 1999