test-drb November 2004

test-drb@ccmp.vtda.org

207 participants
458 discussions

Microway Quadputer/Videoputer transputer setup info needed....

by RMeenaks＠OLF.COM

Hi, I am looking for setup information for the videoputer/quadputer transputer boards from Microway. Does anyone have the manuals? A scan of the docs with the jumpers, settings, etc would be helpful. I am trying to help out a fellow transputer user.... Thanks, Ram (c) 2004 OpenLink Financial Copyright in this message and any attachments remains with us. It is confidential and may be legally privileged. If this message is not intended for you it must not be read, copied or used by you or disclosed to anyone else. Please advise the sender immediately if you have received this message in error. Although this message and any attachments are believed to be free of any virus or other defect that might affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by Open Link Financial, Inc. for any loss or damage in any way arising from its use.

21 years, 1 month

Ancient Graphics tablet

by peterdexter＠tiscali.co.uk

Hi I just noticed your reply to a post at http://www.classiccmp.org/pipermail/cctalk/2003-July/025586.html I have just been given an old (1989) Numonics Graphics tablet. It is boxed and never used. I was wondering if you may have any advice or info on this tablet and if it is possible by any means to get this item up and running under any windows platfortm. I guess it is a long shot but I would be interested and grateful if you had any futher knoweldge on this issue. I can connect the tablet to my comp via the cable that shipped with the tablet but that is as far as I can get. Thanks Peter Dexter

21 years, 1 month

System 36 going dirt cheap (currently $1) for local pickup in Dallas, TX

by wmaddox＠pacbell.net

Somebody ought to grab this... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=74946&item=514221499… --Bill

21 years, 1 month

Santa, for Christmas I would like

by aek＠spies.com

I guess I should try and copy the drive data onto a spare disk in case it decides to fail -- You should back up the software you have, assuming it WILL fail. -- anyone knows where I can get some AOS/VS media from? -- try bruce ray (bkr(a)wildharecomputers.com)

21 years, 1 month

Calcomp 1039 plotter in UK

by djg＠drs-c4i.com

If anybody is interested email plotter(a)pdp8.net which will forward to the plotter owner (spam protection). Email I got offering it: Got your details from the internet. I have an old Calcomp 1039 plotter which I need to dispose of. I note that you may be interested in PDP bits but don't know if this is the sort of beast you may want! It certainly used to be connected to a PDP in the distant past. It has most of the original accessories in their large & small black boxes plus umpteen rolls of media If you want any info please feel free to call me on 01727 875191. leave a voice mail if absent. Or if you know of anyone else who may want such a thing rather than being destined for the local tip! Regards Graham Simms In Hertfordshire.

21 years, 1 month

VCF 7.0 Pictures

by dwight.elvey＠amd.com

>From: "Wayne Smith" <wayne.smith(a)charter.net> > >I have posted a few pictures taken during VCF 7.0 at >http://webpages.charter.net/jpepperman/VCF%207.0.html. > >-W > Hi Of course my exhibit wasn't even noticed or photographed. As usual Sellam gave me half a table and most just figured that I was part of the exhibit next to me ( North Star ). Since my machine was also a woodie, ( much rarer than a North star ) it just blend into the background. Maybe next year I'll be noticed. Dwight

21 years, 1 month

hp 9121

by nataliac＠uvigo.es

I have a Dual Disk Drive HP 9121 that is cabled to an HP 9816 whith operative system HP Basic 2.0. When I copy or save file or program put the message "error 88: read data error". Can you help me? What is the Problem? thanks you and pardon for my english. Natalia Caparrini Spain

21 years, 1 month

MSDos on a dial up ISP?

by ron.hudson＠sbcglobal.net

How do you do that?

21 years, 1 month

Phllips Logic Analyzer Manuals

by aw288＠osfn.org

I have a set of operators manuals for the Phillips PM3551/10/30/50 and /70 logic analyzers (early 80s). One is in a binder, the other is just bound - a total of about 1 1/2 shelf-inches of information. Anyone need these for a couple of bucks plus shipping? William Donzelli aw288(a)osfn.org

21 years, 1 month

ZX81 denigrated! (was Re: Approaches to projects)

by dwight.elvey＠amd.com

>From: ard(a)p850ug1.demon.co.uk ---snip--- > >The expansion connector (the physical form of it, the fact that if the >RAMpack wobbles, the machine crashes). > Hi As I've stated in the past, put some DC#4 silicon grease on the edge connector and you won't have issues with the contacts. Dwight

21 years, 1 month

← Newer
1
...
4
5
6
7
8
9
10
...
46
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb November 2004