out exploring the rements of a paper mill 20 yrs in the making... mess i
stumbled upone this sad iritating site
one crushed smashed up pdp8i in the yard of burnt trashed industrial junk
wasteland
https://www.flickr.com/photos/1ajs/sets/72157651577592077/
I have a software driver for an old scientific instrument that is
described in a brief manual this way:
"The acquisition driver is a tool that allows developers to write their
own Windows based programs that
can acquire data from any Michelson series spectrometer. The programs
can be developed with any
programming environment that supports calling standard Windows 16bit
DLLs. Examples of such
environments are Visual Basic and Visual C++ from Microsoft ( up to
version 1.5 ), Delphi and C++
>from Borland, Labview from National instruments. This document assumes
that the reader is familiar
with all the concepts surrounding DLLs and Windows programming. It is a
reference guide that explains
the parameters of the functions that make up the Bomem acquisition
driver and how they are used to
acquire data."
I recently purchased Visual Basic 4.0 Standard Edition, but the first
pages of the reference indicate that it is a 32 bit only version.
Which version of Visual Basic will allow me to call this driver?
> From: Jorg Hoppe
>> Here's what I have so far:
>> http://ana-3.lcs.mit.edu/~jnc/tech/pdp11/M9301-YA.mac
> Thanks for that effort!
Eh, de nada. Interesting and educational.
> The M9312 code should be similar, at least it may expose some ideas
Some parts of it (e.g. the CPU diagnostic) are mostly identical (and the
comments there, particularly on the single-op register instructions, are
useful to total understanding of that code in the M9301); but alas, I had
already done that part of the M9301 (at least, at a surface level)!
Much of the M9312 (including the functionality of most of what I had yet to
read in the M9301) was quite different. I did manage to get the 'print
number' code out of it, but that was pretty much it.
So I've done a lot of the remaining M9301-YA code (new version uploaded to
location above); not the per-device code, I'll probably blow that off, but
other than that, only a few tiny sections remain to be understood.
Can someone with a M9301-YA please verify for me that location 165450
contains 0770? I think that perhaps that is wrong, because the code makes no
sense if that's correct - maybe a bit has been dropped, or something?
And if anyone has a good M9301-YB, I would appreciate a dump. (I do have one,
but don't - yet - have a running UNIBUS -11 to plug it into.)
> From: Don North
> I've had two DL11-W in my 11/34A BA11-K box for years and have never
> had an LTC issue. I suppose if you had a a larger number (say four or
> more) you might possibly see an LTC issue
Hey, all I know is what's in the manual (which Josh posted). :-)
I'd forgotten there was a jumper you could pull - I tend not to like to do
things like that as it makes the cards non-pull-and-plug interchangeable. Hence
my suggestion to 'just use an M7800'.
Noel
I have an old terminal available in Houston. It is a red terminal with
Bendix and Logicport 2 printed on the front next to the side of the screen
and an acoustic coupler on the top. It comes in a big red carrying case.
Need to move this out if anyone is interested contact me off list otherwise
I guess I'll have to take it to the recycle center. Would rather see it go
to someone who could use or enjoy it.
David Williams
www.trailingedge.com
Second time of sending. A response, please.
While turning out my attic I unearthed obsolete *discs for a 1980s
Amstrad computer *which has long been disposed of. One disc is, as far
as I know, in mint condition but a further twelve contain programmes.
Another six discs contain long forgotten person data which I can't
access. I am intrigued to know what they contain. Also in my searches
I have found a *Microsoft Works manual* complete with system discs, and
an *Amstrad user's manual*. Also about a*dozen 5" discs* containing
stock records of warehouse long demolished. Again, I am curious to see
what I recorded 30 years ago.
I am reluctant to consign these items to the dustbin if a) the discs can
be deciphered, and b) they are are of use to someone else. Your
organisation has been suggested as a possible home for at least some of
these items. Are they of interest? If not, do you know any
organisation that might be?
R.J. Rickard.
Edinburgh.
I don't think I ever asked this here, I apologize if this is a repost from
long ago. I don't remember the answer in any case!
In high school we had an HP 2000/Access system, and in one of the racks was
a non-HP modem or leased line unit that supported multiple lines (maybe
16-ish ISTR). I remember there was a row of silver rocker switches (one for
each channel). I think there was a rotary thumbdial on the right with
numbers on it to select the line, and maybe an LED above each rocker switch
to show which lines were in use. Maybe (not sure) there were some status
LEDS on the right that showed status for whatever line was selected with the
thumbwheel.
I have a picture of the system racks at
https://www.flickr.com/photos/131070638 at N02/17325691225/
In the dual bay HP on the right, it is the left rack, 2nd from the top. It's
just under the 2748B paper tape reader and just above the 7900A disc drive.
I was curious if anyone recognized definitively what brand/model that device
was?
Most unfortunately, that picture includes me holding a trophy for a
programming contest and it shows I once was thin, once had hair, and always
had acne LOL Kinda wish I had cropped it before uploading :\ I apologize for
the fuzziness, it's a picture of a picture and the best I could get. The
time period is roughly 1978-1982, and I think the system was a few years old
already at the beginning of that period (was probably used and put together
>from parts at other schools).
Anyone know for sure on the comm device?
J
I have Debian/Gnome installed on it, 1.2gb RAM and 56gb HD. I never
configured the drivers for the wifi but a network cable works, shouldn't
be hard to get the wifi working, I had it working with a different
distro but swapped it out. Anyway, have a soft case for it and selling
for just $80 plus shipping.
I recently acquired a GE Terminet 300 in the guise of an HP 2762A
terminal, KSR. I am attaching what I have so far in my blog.
I've found little on the technical side for this terminal. If anyone
has a manual I'd appreciate a copy.
It is referenced in one listing of HP manuals, 02762-90001 the service
manual. I'm not sure what to make of the one hit I get on that P/N that
isn't bitsavers mirrors. I figured I'd ask here first. I'll also ask
on the hp equipment group, I am on there too.
hpmuseum.net is welcome to my photos, or contact me offline, and I'll
make some better quality shots for your web site.
I plan to get this going to use for the Multics Simulator at some
point. The TN300 was a common console, and was an early symptom of the
featureless, non-blink'n lites type shop that came to be. I know the
Honeywell 6180 that ran Multics had an 8 panel service panel with
wonderful sets of lights, but it was hidden in a cabinet, and typically
not accessed by the operator.
thanks
Jim
http://jimsoldtoys.blogspot.com/2015/04/2762a-terminal-printer-ge-terminet-…
Hey all --
Last summer I picked up a Ridge 32/330 that became available locally.
This is a fairly obscure early RISC machine intended to be a competitor
to the VAX, it uses a 32-bit CPU at 12.5Mhz built from discrete
components (spanning three large PCBs). Mine's outfitted with 8mb of
ECC memory, Pertec, SMD and SCSI QIC controllers, and Ethernet.
You can see some pictures of this beast at:
https://plus.google.com/117997069161125071032/posts/JtsR3BokUxp?pid=6063976…
I got it running late last year after rebuilding the QIC tape drive and
dealing with some intermittent failures due to a couple of low-quality
DIP sockets. I now have a set of dedicated 20A circuits installed in my
basement so I can run it for longer periods of time without worrying
about burning my house down, so I'll be running it for the next couple
of weeks just for fun to keep the basement warm and run up my electrical
bill :).
It's currently running RX/V 1.1 (Ridge's UNIX variant) and it's on the
Internet (indirectly, since exposing a 25-year old UNIX directly to the
'net seems like a bad idea). I thought maybe some people here might be
interested in checking it out since it's pretty obscure, if you want an
account to play around, drop me a line and I can hook you up. I don't
know of any other Ridge machines out there (running or not) -- if you
have one let me know, there's very little information out there on these
things.
I'll add that I'm looking for an external SMD cabinet and cabling so
that I can image the original SMD disk that was in the Ridge when I got
it; it looks like it contains a valid partition table, but it will not
boot. I didn't want to wipe it so the Ridge is currently running off of
a spare drive -- I'd like to hook it up externally to dump an image from
the running RX/V system. If anyone has one to loan (preferably within
driving distance of Seattle) let me know.
Once that's done, it's time to figure out how to get the Eagle that came
with it running again...
And a huge thanks to Al Kossow for archiving the OS media that's on
Bitsavers, without which this machine would be a very large boat anchor
taking up many cubic feet in my basement. (If anyone has any media or
docs for this that aren't on Bitsavers, let me know -- I'm in particular
looking for an ROS distribution on QIC media...)
- Josh
Question for all in general and Al Kossow in particular... There is a
scanned version of the Qualstar 1260 Service Manual on bitsavers, but it
cuts off right where it gets interesting, just before the schematics in
Appendix C... Does anybody have the full version somewhere with the
schematics at the end? (BTW, the 1052 manual version has the schematics).
The Qualstar tape drive in question hooked up to my Mac SE/30 (of all
things!):
https://www.youtube.com/watch?v=YqIrMXxPGUA
But it misbehaves now (squeaks while motor reverses and fails reads test,
hopefully mechanical?). And my second unit caught another virus and now
refuses to load tape or get the motors going. Both used to work fine. Time
to open them up I guess.
- Marc
