test-drb

test-drb@ccmp.vtda.org

101090 discussions

(fwd) FREE: Collection of Early MS-DOS/PC-DOS SW and manuals

by ynagasaw＠ic.sunysb.edu

I would really like to get old Windows and Turbo Prolog, but I can not go there to pick them up. Is it impossible to send them to me? Of course I will pay for shipping and every thing. Thank you, Yujin Nagasawa

29 years

Radofin Aquarius

by jeffh＠unix.aardvarkol.com

Of course, Sam and others have taken to talking about the Mattel Aquarius lately, but I've never seen a mention of the Radofin version, which other than the lack of 'Mattel' logos and the change to the model number and label on the bottom of the machine, is identical. Were many of them sold? Does anyone else out there have one? About all I've been able to learn is that since Radofin was the actual manufacturer of both versions, they continued to produce it for an unknown length of time after Mattel dropped it from their line. There's not even a mention of it on any of the Aquarius references on the web. Jeff jeffh(a)unix.aardvarkol.com -- --------------------------------------------------------------------- Sent from an Amiga 3000..the computer for the creative mind! --------------------------------------------------------------------- Collector of classic home computers: Amiga 1000, Apple II+, Atari 800, 800XL, Mega-ST/2 and XE System, Coleco ADAM, Commodore 128D, 16, Plus/4 and VIC-20, IBM 5155, Kaypro 2X, Mattel Aquarius, Osborne Executive, Radofin Aquarius, Sinclair ZX-81, TI-99/4A, Timex-Sinclair 1000, TRS-80 Color Computer-3, Model 4, and Model 4P, plus Odyssey2, Atari Superpong and 2600VCS game consoles.

29 years

(fwd) FREE: Collection of Early MS-DOS/PC-DOS SW and manuals

by danjo＠xnet.com

A non-text attachment was scrubbed... Name: not available Type: text Size: 2462 bytes Desc: not available Url : http://www.classiccmp.org/pipermail/cctalk/attachments/19970609/6a01d0a8/at…

29 years

How to read/write TRS-80 diskettes from PC?

by allisonp＠world.std.com

> Does anyone know how to read/write TRS-80 Model I format diskettes with > a PC? > > I have a CompatiCard II and a Copy II Option Board. I assume the Option > Board is able to copy TRS-80 diskettes (I hope, just got it this weekend > and haven't tried yet) but I need to actually write files. Sydex 22Disk > appears to support only CP/M formats. TRS-80 disks are single density, single sided, soft sector non-cpm unless after market cpm is installed. The original disk controller was wd1771. There is two form to trs-80 disks those from TRSDOS and those from DiskBASIC. As far as I remember(18 years!) they were compatble with each other. Their structure was very unlike CP/M and it used a FAT style of directory. Now to add to the pain, there were various mods that allowed for double density and even two sided disk drives. If so the controller was wd1793 in the form of a piggy back card. Knowing the controller used is important as some of the system out there created disk formats that are completely unreadable by anything other than a system with 1771/1793! Allison

29 years

TRS-80, etc.

by coslor＠pscosf.peru.edu

Howdy folks: I am writing this to let you know... if you would like to be mailed a very complete listing of TRS-80 hardware and software, just e-mail me with your name and mailing address to coslor(a)bobcat.peru.edu. This listing costists of 65 pages and will be sent via 1st Class mail ASAP. If you would like it even quicker, please send $3 to the address below to cover MOST of the shipping charges... you would then be 'prioritized'. I collect all types of TRS-80 hardware and software, and specialize in games in both original diska nd tape format, as well as converted for use with modern PC emulators. I have a HUGE collection and would like to share this with others. I like to think I have 'nearly' every commercially sold game (and hundreds of others) written for the TRS-80 line of computers. I also have most applications and DOSs ... all for the Model 1,3,4 as well as a limited supply of CoCo hardware and software. I also collect for many other classic systems, including but not limited to: MSX, Colour Genie, Apple ][, Apple ][e, Apple ][c, Apple ][+, Commodore 64, C-16, Vic 20, Plus 4, Atari series, Coleco, Sincalire Spectrum, P2000, and Vectrex systems. All I ask for most of the software is to be compensated for my expenses (postage, media, etc.) and have very low prices on most of my hardware as I have accumulated a large inventory over the years and need to clear my shelves. I am also looking for the following items in particular: 1) YOUR classic hardware and/or software. I am always buying and trading for those item. 2) 80-Micro, TRS-80 Microcomputing News, Computer News 80, and 80-US Journal magazines, etc. 3) Original manuals, instruction, and game boxes concerning the TRS-80 4) Atari 800 - Atari Artist cartridge. A800LX - RX8053. Just please remember, I am always buying, selling, and trading for these hard to find items... even for things not on the above list. If you're looking for something or have some things to offer... PLEASE let me know. I simply love the TRS-80 and other classic machines and would appreciate any help you may be able to provide in expanding my collection. I most gladly will help you out in adding to your own classic computer or game machine collection. Finally, I have ALL my original disk, tape, and cartridge software... for all systems, converted to run on their respective PC emulators! Send me your want lists, request for a catalog, or what you have to offer: via e-mail, United States Postal Service, or give me a call... I look forward to hearing from you. Best Wishes, CORD COSLOR //*=====================================================================++ || Cord G. Coslor P.O. Box 308 - 1300 3rd St. Apt "M1" -- Peru, NE || || (402) 872- 3272 coslor(a)bobcat.peru.edu 68421-0308 || || Classic computer software and hardware collector || || Autograph collector || ++=====================================================================*//

29 years

Cleaning Plastic

by chemif＠mbox.queen.it

At 05:38 09/06/97 -0700, Greg Mast wrote: > > I apologize if this is a repeat question but I can't seem to find the > previous post. > > What were the solutions to removing yellowing from the plastic cases? I > bought a printer that looks terrible. Not sure what caused it so any > suggestions helpful at this point. > > thanks, > > Greg > Hi Greg, I don't know if this will help you in solving cleaning problems, but here is my favourite: FULCRON from AREXONS. I do maintenance and cleaning of computer cases since 10 years (for both job and passion), and i found it to clean jellow stains (caused by nicotine) EVEN BETTER THAN TRIELINE (honestly I find it better than anything else for any kind of dirt exept: paint and ink). It seems to take away the outer layer of jellowing but is not smelling like any petrol derived-solvent. I don't know if you will be able to find it there (AREXONS it's a multinational company, isn't it?), but here in Italy was introduced 3 years ago and now you can find it in any detergent shop. For ink and tape adhesive I use a ISOPROPILIC ALCOOL based product called TERGITUTTO, but this time the company (Sutter) I'm shure it's Italian only, so try to find a similar remedy in your town. Bye Riccardo Romagnoli. Classic Computer Collector Forli' - Italy

29 years

Removing adhesive (RE: Cleaning Plastic)

by kaikal＠MICROSOFT.com

I recommend "3M General Purpose Adhesive Remover", which is inexpensive and comes in a red and white quart-size can that will last you until roughly the year 2020. Some hardware stores carry it, but it's most reliably found at an auto paint supply store (check your local yellow pages). I once used this stuff to remove an entire vinyl top from a '68 Chevy, so I can tell you it really does work, and does not appear to harm either your skin or any kind of plastic. Doesn't smell very bad, and isn't highly flammable. In response to an earlier question, Cameo copper cleaner can be found in most any grocery store or general goods store. Kai > ---------- > From: Sam Ismail[SMTP:dastar@crl.com] > Reply To: classiccmp(a)u.washington.edu > Sent: Monday, June 09, 1997 10:56 AM > To: Discussion re-collecting of classic computers > Subject: Re: Cleaning Plastic > > On Mon, 9 Jun 1997, Mr. Self Destruct wrote: > > > I've always just used those blue brillo pad thingys. They generally > do > > well at taking off a bunch of hard to remove stuff (tape spooge, > stains, > > etc.) Sometimes when I'm REALLY bored I take the keyboard apart > (keycaps, > > etc.) and scrub them up too. Real satisfying to see a 12 year old > machine > > look like new... > > Regarding "tape spooge" (what a great moniker, if not gross) this is > the > bane of my existence. I hate that shit. I went out and got some > stuff > called Goof Off from Home Depot which was supposed to do away with > that > stuff but it didn't work very well. I didn't try it on anything metal > > yet, but most of my problems are with people putting velcro with the > sticky backs on plastic cases. I tried cleaning some plastic with > tape > spooge on it and it just melted the damn thing. Anyone have any > ideas? > > Sam > ---------------------------------------------------------------------- > --------- > Computer Historian, Programmer, Musician, Philosopher, Athlete, > Writer, Jackass >

29 years

Cleaning Plastic

by kaikal＠MICROSOFT.com

Yellowing may be irreversible. I've been thinking of removing all electronics from a case, and soaking it in dilute bleach solution overnight. I did find a great method for removing permanent marker from textured plastic. Cameo copper cleaner powder works great and doesn't harm the texture. For other stains, I use a Scotch Brite pad of the type that says it's safe on fiberglass. I'd sure like to find a good method for cleaning keyboards. Kai > ---------- > From: Greg Mast[SMTP:gmast@polymail.cpunix.calpoly.edu] > Reply To: classiccmp(a)u.washington.edu > Sent: Monday, June 09, 1997 12:10 AM > To: Discussion re-collecting of classic computers > Subject: Cleaning Plastic > > I apologize if this is a repeat question but I can't seem to find the > previous post. > > What were the solutions to removing yellowing from the plastic cases? > I > bought a printer that looks terrible. Not sure what caused it so any > suggestions helpful at this point. > > thanks, > > Greg >

29 years

How to read/write TRS-80 diskettes from PC?

by kaikal＠MICROSOFT.com

Does anyone know how to read/write TRS-80 Model I format diskettes with a PC? I have a CompatiCard II and a Copy II Option Board. I assume the Option Board is able to copy TRS-80 diskettes (I hope, just got it this weekend and haven't tried yet) but I need to actually write files. Sydex 22Disk appears to support only CP/M formats. Any ideas? thanks Kai

29 years

Buzzing PS?

by ds_spenc＠alcor.concordia.ca

Hi, The Apple /// I picked up last weekend has one annoying flaw, and that is a *very* loud power supply, that seems to get louder the longer the machine is powered up. I think this thing becomes even louder than our 1950s-era Westinghouse refrigerator. (OK, perhaps an exaggeration, but the sound seems to carry farther.) There is nothing obviously functionally wrong with the computer - it boots up fine, there's no wavering or glitching in the display, nothing to say that something might be wrong. Except the buzzing. It makes me nervous. Is this noise normal, or is it a sign that something is about to go kablooie? And if something's wrong, is there any way of knowing which part is about to go? It looks like the power supply should be easy to repair, but I don't know what I'm doing with these things. I know it's been stated here that power supplies should be checked before powering anything up, but I don't really know how to do that, and sometimes I'm just too impatient to see my new toys running. Doug Spence ds_spenc(a)alcor.concordia.ca

29 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb