test-drb

test-drb@ccmp.vtda.org

101090 discussions

Network gear that supported StarLAN 1 (not 10)

by classiccmp＠crash.com

I was wondering if anybody remembers which networking vendors supported StarLAN 1, or 802.3e / 1Base5, back in the 1980s? Hoping to get product names and/or model numbers. I've come across some references to Western Digital, Micom-Interlan, Cross Comm Corp (Massachusetts), and Fox Research (later DCA?) possibly having offered products to bridge StarLAN to Ethernet. But in the few cases where I've seen a model (ex. Cross Comm 487 Series) I haven't been able to get past blurbs in Info World. I have one host interface, expect more to arrive shortly, and would love to track down a bridge/switch/router that might allow me to make them reachable from Ethernet. Thanks, --Steve.

6 years

SIMH on low overhead platform

by john＠ziaspace.com

On Aug 17, 2020, at 12:43 AM, Tom Hunter via cctalk <cctalk at classiccmp.org> wrote: > > > > Has SIMH been ported to a low overhead (instant-on) platform? > > I use NetBSD on a surplus HP ProLiant DL360p Gen8, NetBSD 9.0-stable > boots in just a few seconds. The hardware itself takes a couple minutes > to go through its bootstrap process, however. (I should have considered > setting up ESXi and installing NetBSD atop that to avoid the hardware > boot process, since I'm regularly rebuilding and updating NetBSD?) It's funny, but it seems to be true that the pricier hardware takes longer to POST. I bought several AMD AM1 CPUs / motherboards when a set only cost $50 and I use them as routers running NetBSD. From power on to booting the kernel is less than three seconds. Getting to fully multiuser is less than 30 seconds, even with DHCP. > Oh yeah, NetBSD 9.0-stable 64-bit also only takes a few seconds to boot > on a Raspberry Pi 3B+. It's easy enough to just throw on an SD card and > try out. Alas the Raspberry Pi 4 isn't supported yet by NetBSD, though I > think it's coming along. An RPi4 with 4 or 8GB of RAM should be a very > nice turnkey SIMH server. Yes, the Pis boot very quickly. The Pi 4 is supported, but just not in NetBSD 9. The Pi 4 takes a wee bit longer to boot because it uses UEFI, but I think the difference in performance is well worth the extra few seconds. https://github.com/pftf/RPi4 https://twitter.com/AnachronistJohn/status/1287628712981049345 A bonus is that you can boot directly off of USB attached storage (although I'm still loading UEFI and the kernel off of the SD card). SIMH runs very well on the Pi 4. John

6 years

UniSys ClearPath OS/2200 Express?

by Kevin＠RawFedDogs.net

Classic Computer Fans, Technically this isn't a classic OS, but I suspect its lineage goes back far enough to be of interest. Has anyone tried out UniSys ClearPath OS/2200 Express? https://www.UniSys.com/offerings/clearpath-forward/clearpath-forward-produc… I normally don't run Windows at home, but have set up a Windows 7 VM to try it out. It includes a few PDFs, including basic startup and shutdown procedures. I haven't found any intro to OS/2200 type docs yet. If anyone knows of any, please let me know. It looks like it could be an interesting system, if I can ever learn my way around. -- Kevin http://www.RawFedDogs.net http://www.Lassie.xyz http://www.WacoAgilityGroup.org Bruceville, TX What's the definition of a legacy system? One that works! Errare humanum est, ignoscere caninum.

6 years

Sun/3-powered 737 flight sim

by michael.99.thompson＠gmail.com

> > Date: Mon, 17 Aug 2020 00:22:52 -0700 > From: Brendan Shanks <brendan at bslabs.net> > Subject: Sun/3-powered 737 flight sim > > Something that I thought the folks here would appreciate: a fellow in > Dubai is trying to keep a full-motion Boeing 737-300 sim (from 1991) > running. > The main host machine is a Sun/3E, connected over Ethernet to the operator > workstation which has 2 Sun/3Es each with a cgtwo powering a CRT touch > screen. One of the Sun VME SCSI/Ethernet boards died, and he?s been unable > to find a (working) replacement board. > > There?s also a big rack of Concurrent hardware running OS/32, and some > newer PCs for visuals and TCAS. > > Plenty of pictures and a video tour of all the hardware at: > < > https://www.reddit.com/r/BSD/comments/i8c8u7/how_do_i_emulate_a_sun_3e_comp… > < > https://www.reddit.com/r/BSD/comments/i8c8u7/how_do_i_emulate_a_sun_3e_comp… > >> > > Brendan > I have a Sun 3/E, including a SCSI/Ethernet board, that ran fine the last time it was powered on. There is a collector in southern Germany who also has a 3/E board set. I didn't see any contact information for the simulator owners. -- Michael Thompson

6 years

Sun Ultra 10 - openBSD 6.7+Creator3D+sunffb: Xorg and xenocara freeze the system

by bvasea＠gmail.com

Greetings. I would like to solve a mistery regarding graphical user interface on a Sun Ultra 10+ Creator3D UPA graphics card, running OpenBSD 6.7/sparc64. Everything works fine with Solaris 10. Did anybody manage to get X running on openBSD? Sparc64 support is somehow bogus so I feel that if I talk to them, there will be no answer. Here is what I am trying to do and hope will help others: - installed openBSD on two Sun Ultra 10 machines: one machine full install (with X packages), the other without X, but xenocara compiled later; - Configured /etc/X11/xorg.conf as described in attached file 1; The same issues were observed for both Xorg and xenocara, so I suspect there's something wrong with sunffb: - /var/log/Xorg.0.log shows everything is in order (except for a xaa warning) as described in attached file 2; - at each startx (without system reboot), X registers a new display :0 :1 :2 :3 and so on. It never falls back to :0 unless I tell it manually to do so: startx -- :0 - so at this time, for both machines the attached file 2 is "/var/log/Xorg.10.log" (last X session); - startx says "Unknown boardID[000000ff], assuming FFB2, DoubleRES, Z-buffer, Single-buffered."; - dmesg is shown in attached file 3; - GUI starts, as confirmed by ps aux; - Screen becomes white, the previous black text becomes yellow. Window manager (wmaker) is running; - if creator0 kernel flag is set to 1 (disable accel), some blue dots appear instead of yellow text, but still no graphics; - I tried both default, 28.636 and 29.5 "Option" "ReferenceClock" according to xorg.conf manual - Xorg.0.log reports this option is never used; - if I start X11vnc, I can get a vnc client connection but the screen is white - so I suspect there is some wrong memory mapping: sunffb is using some bogus memory location while x11vnc is reading from somewhere else. Did anyone encounter this problem? Please advise. Best wishes, Vasile Buruiana (bvasea!gmail[]com) ____________________________ Attached file 1: /etc/X11/xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "On" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/TTF/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/CID/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "Module" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "Protocol" "wskbd" Option "Device" "/dev/wskbd0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "SunMouse" Option "Device" "/dev/tty00" Option "BaudRate" "1200" EndSection Section "Monitor" Identifier "Monitor" VendorName "Unknown" ModelName "Unknown" HorizSync 31.5-60 VertRefresh 50-70 EndSection Section "Device" Identifier "creator0" # Driver "wsfb" # Option "device" "/dev/ttyC0" Driver "sunffb" Option "ReferenceClock" "28.636" # Option "UseFBDev" "true" # Option "accel" "True" VendorName "Elite3D" BoardName "SUNW" # Option "device" "/dev/console" EndSection Section "Screen" Identifier "Screen0" Device "creator0" Monitor "Monitor" DefaultDepth 24 SubSection "Display" Depth 24 FbBpp 32 Weight 8 8 8 EndSubSection EndSection __________________________________________________________ attached file 2: /var/log/Xorg.10.log __________________________________________________________ [ 3904.433] (--) Using wscons driver on /dev/ttyD0 [ 3904.476] X.Org X Server 1.20.8 X Protocol Version 11, Revision 0 [ 3904.477] Build Operating System: OpenBSD 6.7 sparc64 [ 3904.479] Current Operating System: OpenBSD frectie.seprom.ro 6.7 GENERIC#306 sparc64 [ 3904.482] Build Date: 16 August 2020 02:14:23AM [ 3904.482] [ 3904.483] Current version of pixman: 0.38.4 [ 3904.483] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 3904.484] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 3904.489] (==) Log file: "/var/log/Xorg.10.log", Time: Sun Aug 16 10:31:31 2020 [ 3904.493] (==) Using config file: "/etc/X11/xorg.conf" [ 3904.493] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d" [ 3904.496] Parse error on line 10 of section Files in file /etc/X11/xorg.conf Ignoring obsolete keyword "RgbPath". [ 3904.499] (==) ServerLayout "X.org Configured" [ 3904.499] (**) |-->Screen "Screen0" (0) [ 3904.499] (**) | |-->Monitor "Monitor" [ 3904.505] (**) | |-->Device "creator0" [ 3904.505] (**) |-->Input Device "Mouse0" [ 3904.506] (**) |-->Input Device "Keyboard0" [ 3904.507] (**) Option "Xinerama" "On" [ 3904.507] (==) Automatically adding devices [ 3904.507] (==) Automatically enabling devices [ 3904.507] (==) Not automatically adding GPU devices [ 3904.508] (**) Xinerama: enabled [ 3904.508] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 3904.509] (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. [ 3904.509] Entry deleted from font path. [ 3904.510] (**) FontPath set to: /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/75dpi/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/misc/, /usr/X11R6/lib/X11/fonts/TTF/, /usr/X11R6/lib/X11/fonts/OTF/, /usr/X11R6/lib/X11/fonts/Type1/, /usr/X11R6/lib/X11/fonts/100dpi/, /usr/X11R6/lib/X11/fonts/75dpi/ [ 3904.510] (==) ModulePath set to "/usr/X11R6/lib/modules" [ 3904.510] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 3904.510] (WW) Disabling Mouse0 [ 3904.511] (WW) Disabling Keyboard0 [ 3904.511] (II) Loader magic: 0xeefafa6010 [ 3904.511] (II) Module ABI versions: [ 3904.511] X.Org ANSI C Emulation: 0.4 [ 3904.511] X.Org Video Driver: 24.1 [ 3904.511] X.Org XInput driver : 24.1 [ 3904.511] X.Org Server Extension : 10.0 [ 3904.520] (--) PCI:*(1 at 0:2:0) 1002:4750:0000:0000 rev 92, Mem @ 0xe1000000/16777216, 0xe2000000/4096, I/O @ 0x00000000/256, BIOS @ 0x????????/131072 [ 3904.521] (II) "glx" will be loaded by default. [ 3904.521] (II) LoadModule: "glx" [ 3904.526] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so [ 3904.559] (II) Module glx: vendor="X.Org Foundation" [ 3904.559] compiled for 1.20.8, module version = 1.0.0 [ 3904.559] ABI class: X.Org Server Extension, version 10.0 [ 3904.560] (II) LoadModule: "sunffb" [ 3904.563] (II) Loading /usr/X11R6/lib/modules/drivers/sunffb_drv.so [ 3904.564] (II) Module sunffb: vendor="X.Org Foundation" [ 3904.565] compiled for 1.20.8, module version = 1.2.2 [ 3904.565] Module class: X.Org Video Driver [ 3904.565] ABI class: X.Org Video Driver, version 24.1 [ 3904.565] (II) SUNFFB: driver for Creator, Creator 3D and Elite 3D [ 3904.565] (WW) Falling back to old probe method for sunffb [ 3904.567] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 3904.568] (**) SUNFFB(0): RGB weight 888 [ 3904.568] (==) SUNFFB(0): Default visual is TrueColor [ 3904.569] (==) SUNFFB(0): Using gamma correction (1.0, 1.0, 1.0) [ 3904.569] (==) SUNFFB(0): Using HW cursor [ 3904.569] (II) Loading sub module "fb" [ 3904.569] (II) LoadModule: "fb" [ 3904.576] (II) Loading /usr/X11R6/lib/modules/libfb.so [ 3904.579] (II) Module fb: vendor="X.Org Foundation" [ 3904.579] compiled for 1.20.8, module version = 1.0.0 [ 3904.579] ABI class: X.Org ANSI C Emulation, version 0.4 [ 3904.579] (II) Loading sub module "xaa" [ 3904.579] (II) LoadModule: "xaa" [ 3904.592] (WW) Warning, couldn't open module xaa [ 3904.592] (EE) SUNFFB: Failed to load module "xaa" (module does not exist, 0) [ 3904.592] (II) SUNFFB(0): Loading XAA failed, acceleration disabled [ 3904.592] (II) Loading sub module "ramdac" [ 3904.592] (II) LoadModule: "ramdac" [ 3904.593] (II) Module "ramdac" already built-in [ 3904.593] (II) Loading sub module "dbe" [ 3904.593] (II) LoadModule: "dbe" [ 3904.593] (II) Module "dbe" already built-in [ 3904.593] (==) SUNFFB(0): DPI set to (96, 96) [ 3904.598] (II) creator0: Unknown boardID[000000ff], assuming FFB2, DoubleRES, Z-buffer, Single-buffered. [ 3904.600] (II) creator0: BT9068 (PAC1) ramdac detected (with normal cursor control) [ 3904.601] (II) creator0: Detected Creator/Creator3D [ 3904.606] (==) SUNFFB(0): Backing store enabled [ 3904.606] (==) SUNFFB(0): Silken mouse enabled [ 3904.609] (==) SUNFFB(0): DPMS enabled [ 3904.610] (WW) SUNFFB(0): Option "ReferenceClock" is not used [ 3904.610] (II) Initializing extension Generic Event Extension [ 3904.616] (II) Initializing extension SHAPE [ 3904.622] (II) Initializing extension MIT-SHM [ 3904.628] (II) Initializing extension XInputExtension [ 3904.634] (II) Initializing extension XTEST [ 3904.640] (II) Initializing extension BIG-REQUESTS [ 3904.646] (II) Initializing extension SYNC [ 3904.652] (II) Initializing extension XKEYBOARD [ 3904.657] (II) Initializing extension XC-MISC [ 3904.663] (II) Initializing extension SECURITY [ 3904.669] (II) Initializing extension XINERAMA [ 3904.669] (II) Initializing extension XFIXES [ 3904.675] (II) Initializing extension RENDER [ 3904.681] (II) Initializing extension RANDR [ 3904.681] (II) Initializing extension COMPOSITE [ 3904.687] (II) Initializing extension DAMAGE [ 3904.693] (II) Initializing extension MIT-SCREEN-SAVER [ 3904.698] (II) Initializing extension DOUBLE-BUFFER [ 3904.704] (II) Initializing extension RECORD [ 3904.710] (II) Initializing extension DPMS [ 3904.715] (II) Initializing extension Present [ 3904.721] (II) Initializing extension DRI3 [ 3904.721] (II) Initializing extension X-Resource [ 3904.727] (II) Initializing extension XVideo [ 3904.732] (II) Initializing extension XVideo-MotionCompensation [ 3904.732] (II) Initializing extension GLX [ 3904.739] (II) AIGLX: Screen 0 is not DRI2 capable [ 3904.868] (II) IGLX: Loaded and initialized swrast [ 3904.868] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 3904.868] (II) Initializing extension XFree86-VidModeExtension [ 3904.874] (II) Initializing extension XFree86-DGA [ 3904.879] (II) Initializing extension XFree86-DRI [ 3904.879] (II) Initializing extension DRI2 [ 3907.959] (II) config/wscons: checking input device /dev/wskbd [ 3907.959] (II) wskbd: using layout us [ 3907.960] (II) LoadModule: "kbd" [ 3907.965] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so [ 3907.968] (II) Module kbd: vendor="X.Org Foundation" [ 3907.968] compiled for 1.20.8, module version = 1.9.0 [ 3907.968] Module class: X.Org XInput Driver [ 3907.968] ABI class: X.Org XInput driver, version 24.1 [ 3907.968] (II) Using input driver 'kbd' for '/dev/wskbd' [ 3907.969] (**) /dev/wskbd: always reports core events [ 3907.970] (**) /dev/wskbd: always reports core events [ 3907.970] (**) Option "Protocol" "standard" [ 3907.971] (**) Option "XkbRules" "base" [ 3907.971] (**) Option "XkbModel" "pc105" [ 3907.971] (**) Option "XkbLayout" "us" [ 3907.971] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6) [ 3907.977] (II) config/wscons: checking input device /dev/wsmouse [ 3907.978] (II) LoadModule: "ws" [ 3907.983] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so [ 3907.985] (II) Module ws: vendor="X.Org Foundation" [ 3907.985] compiled for 1.20.8, module version = 1.3.0 [ 3907.985] Module class: X.Org XInput Driver [ 3907.985] ABI class: X.Org XInput driver, version 24.1 [ 3907.985] (II) Using input driver 'ws' for '/dev/wsmouse' [ 3907.985] (**) /dev/wsmouse: always reports core events [ 3907.986] (II) ws: /dev/wsmouse: debuglevel 0 [ 3907.986] (**) Option "Device" "/dev/wsmouse" [ 3907.986] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5 [ 3907.986] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7 [ 3907.986] (**) ws: /dev/wsmouse: associated screen: 0 [ 3907.987] (II) ws: /dev/wsmouse: minimum x position: 0 [ 3907.987] (II) ws: /dev/wsmouse: maximum x position: 1151 [ 3907.987] (II) ws: /dev/wsmouse: minimum y position: 0 [ 3907.988] (II) ws: /dev/wsmouse: maximum y position: 899 [ 3907.988] (==) ws: /dev/wsmouse: Buttons: 7 [ 3907.988] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5 [ 3907.988] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 7) [ 3907.992] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1 [ 3907.992] (**) /dev/wsmouse: (accel) acceleration profile 0 [ 3907.993] (**) /dev/wsmouse: (accel) acceleration factor: 2.000 [ 3907.993] (**) /dev/wsmouse: (accel) acceleration threshold: 4 [ 3908.018] (EE) Failed to open authorization file "/root/.serverauth.68zMtvOjbh": Permission denied [ 3918.136] (II) UnloadModule: "ws" [ 3918.138] (II) UnloadModule: "kbd" __________________________________________________________ attached file 3: dmesg output __________________________________________________________ console is keyboard/display Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.7 (GENERIC) #306: Thu May 7 18:19:56 MDT 2020 deraadt at sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1038467072 (990MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root: Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz) cpu0 at mainbus0: SUNW,UltraSPARC-IIi (rev 9.1) @ 440 MHz cpu0: physical 16K instruction (32 b/l), 16K data (32 b/l), 2048K external (64 b/l) psycho0 at mainbus0 addr 0xfffc4000: SUNW,sabre, impl 0, version 0, ign 7c0 psycho0: bus range 0-2, PCI bus 0 psycho0: dvma map c0000000-dfffffff pci0 at psycho0 ppb0 at pci0 dev 1 function 1 "Sun Simba" rev 0x13 pci1 at ppb0 bus 1 ebus0 at pci1 dev 1 function 0 "Sun PCIO EBus2" rev 0x01 auxio0 at ebus0 addr 726000-726003, 728000-728003, 72a000-72a003, 72c000-72c003, 72f000-72f003 power0 at ebus0 addr 724000-724003 ivec 0x25 "SUNW,pll" at ebus0 addr 504000-504002 not configured sab0 at ebus0 addr 400000-40007f ivec 0x2b: rev 3.2 sabtty0 at sab0 port 0 sabtty1 at sab0 port 1 comkbd0 at ebus0 addr 3083f8-3083ff ivec 0x29: layout 34 wskbd0 at comkbd0: console keyboard comms0 at ebus0 addr 3062f8-3062ff ivec 0x2a wsmouse0 at comms0 mux 0 lpt0 at ebus0 addr 3043bc-3043cb, 30015c-30015d, 700000-70000f ivec 0x22: polled "fdthree" at ebus0 addr 3023f0-3023f7, 706000-70600f, 720000-720003 ivec 0x27 not configured clock1 at ebus0 addr 0-1fff: mk48t59 "flashprom" at ebus0 addr 0-fffff not configured audioce0 at ebus0 addr 200000-2000ff, 702000-70200f, 704000-70400f, 722000-722003 ivec 0x23 ivec 0x24: nvaddrs 0 audio0 at audioce0 hme0 at pci1 dev 1 function 1 "Sun HME" rev 0x01: ivec 0x7e1, address 08:00:20:c0:ff:ef nsphy0 at hme0 phy 1: DP83840 10/100 PHY, rev. 1 machfb0 at pci1 dev 2 function 0 "ATI Mach64" rev 0x5c machfb0: ATY,GT-C, 1152x900 wsdisplay0 at machfb0 mux 1 wsdisplay0: screen 0 added (std, sun emulation) pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0646" rev 0x03: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using ivec 0x7e0 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080P0> wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors wd1 at pciide0 channel 0 drive 1: <WDC WD800JB-00JJC0> wd1: 16-sector PIO, LBA, 76319MB, 156301488 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <ASUS, DRW-1608P3S, 1.06> removable wd2 at pciide0 channel 1 drive 1: <WDC WD1600AAJB-00J3A0> wd2: 16-sector PIO, LBA48, 152627MB, 312581808 sectors cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 wd2(pciide0:1:1): using PIO mode 4, DMA mode 2 ppb1 at pci0 dev 1 function 0 "Sun Simba" rev 0x13 pci2 at ppb1 bus 2 creator0 at mainbus0 addr 0xfebee000: Elite3D, model SUNW,XXX-XXXX, dac 0, 1152x900 wsdisplay1 at creator0 mux 1: console (std, sun emulation), using wskbd0 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets bootpath: /pci at 1f,0/pci at 1,1/ide at 3,0/disk at 0,0 root on wd0a (1f60d5c98cb9f231.a) swap on wd0b dump on wd0b _____________________________________________________________

6 years

MOS MCS2529 math chip

by fgueissaz59＠gmail.com

Hi Jules, Still interested to find out about powering the Melcor SC-635? I got one and succeeded to power it from 2.2 to 3.0V There is a switching regulator on the PCB (AS1930 from Astec International) that generates negative voltages (as referred to the negative side of the battery: -12.4V , -4.8V , and -2.0V At 2.4V, the current drain varies from 71mA (idle mode) to 185mA (all LED segments lit). For some strange reason, this current rises to 211mA when the C/CE key is pressed I will design a substitute power supply based on a single Li-ion battery with step-down regulator to deliver 2.4V Best regards Francois

6 years

Sun/3-powered 737 flight sim

by brendan＠bslabs.net

Something that I thought the folks here would appreciate: a fellow in Dubai is trying to keep a full-motion Boeing 737-300 sim (from 1991) running. The main host machine is a Sun/3E, connected over Ethernet to the operator workstation which has 2 Sun/3Es each with a cgtwo powering a CRT touch screen. One of the Sun VME SCSI/Ethernet boards died, and he?s been unable to find a (working) replacement board. There?s also a big rack of Concurrent hardware running OS/32, and some newer PCs for visuals and TCAS. Plenty of pictures and a video tour of all the hardware at: <https://www.reddit.com/r/BSD/comments/i8c8u7/how_do_i_emulate_a_sun_3e_comp… <https://www.reddit.com/r/BSD/comments/i8c8u7/how_do_i_emulate_a_sun_3e_comp…>> Brendan

6 years

Looking for a Stride OS set

by jos.dreesen＠greenmail.ch

I currently have 3 Stride 420 boards in various state of repair, one presumably fully functional,? and would need an OS set for these. Anyone have actual floppies or IMD images of either ucsd.p or Liason OS for these machines, or even just CP/M 68K ? There are disk iimages under the header "Stride"? on the web and Bitsavers,? but these are actually for the previous generation machines ( Sage II and IV) Jos

6 years

No subject

by jnc＠mercury.lcs.mit.edu

> From: Peter Van Peborgh > From: Antonio Carlini > From: Jim Stephens Everyone: please DO NOT send messsages to CCTalk/CCTech with no Subject: line in the header: that results in un-linked, and thus un-clickable, entries in the archive (which some of, like me, use to read the list), e.g.: http://www.classiccmp.org/pipermail/cctalk/2020-August/date.html Thank you. Noel

6 years

Diloq SQ703 to SQ706 conversion

by nw.johnson＠ieee.org

I'm getting back to trying to restore my MicroVax II.? Existing controllers are ESDI and MFM, disks hard to find. So I would like to convert a brand-new DQ703 I have to SQ706 so I can mount SCSI disks. I understand it is just? a prom change. Does anybody have any info, or perhaps a PROM image? cheers, Nigel -- Nigel Johnson, MSc., MIEEE, VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! Skype: TILBURY2591 nw.johnson at ieee.org

6 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb