test-drb

test-drb@ccmp.vtda.org

101090 discussions

Start a nNew thread

4054 in Sacramento

by aek＠bitsavers.org

https://www.ebay.com/itm/TEKTRONIX-Model-4054A-ALL-IN-ONE-Microcomputer-Vin… good price, it's BIG though..

6 years, 2 months

Bendix G15 Drum

by hills.barry＠gmail.com

Does anyone have an idea as to the value of a Bendix G15 Drum? Its time to pass mine to another caring collector who would appreciate it but I am not sure how of its value. Obviously it is rare but the market demand is unclear to me. thank you

6 years, 2 months

Buying external SMD cables for Sun gear

by aperry＠snowmoose.com

? As previously discussed here, I have a Sun 3/260 that connects to a Sun external storage subsystem containing two 8? SMD drives. The external cabling is a 0.7m D-sub 25-pin (male both ends) data cable for each drive and a paired set of 0.7m D-sub 25- and 37-pin (male both ends) command cables. These cables are straight through connections between internal ribbon cables from the drives (CDC 9720-368 and Fujitsu M2372) to the controller board (Xylogics 451 on a VME adapter). For reasons described below, I have been unable to buy the original Sun cables. Should off-the-shelf D-sub 25- and 37-pin cables work? I guess electrical shielding/noise could be a concern? As to why I am looking for alternatives, MemoryX has been my source for this kind of stuff, but they have lost my trust. I ordered a full set of cables from them on 2 Jan and they have gone silent responding to my queries on that order. Then this month they were selling a couple sets of the control cables on eBay. I bought the second set. They marked it shipped, left positive comments about the transaction on eBay, but the cable set didn?t arrive as scheduled last Friday and yesterday they cancelled the eBay auction and refunded what I paid, all without any explanation. They still list the cables on their website, each $100 more than what they were when I ordered them on 2 Jan. alan

6 years, 2 months

Parasitic Engineering Altair Clock Fix Kit...

by deramp5113＠yahoo.com

I scanned my Parasitic clock mod documents and put them at the link below. https://deramp.com/downloads/altair/hardware/altair_8800_computer/Parasitic… Mike

6 years, 2 months

Seeking Zenith Data Systems Z183-92 documentation

by jplist2008＠kiwigeek.com

Good afternoon all; I picked up a ZDS Z183-92 laptop over the weekend alongside a Kodak Diconix 150 portable inkjet printer. The prior owner doesn't think he ever had a power supply for the Z183, although he discovered that it does power up sort-of from the Diconix power supply wallwart(!) The underside of the laptop has "12V" - and nothing else - so my assumption is I need to find a 12V pack of suitable amperage. The Diconix supply is 9VDC. The 9VDC is enough to bring up the LCD and at least some of the internals (presumably the +5v ones) to have it _appear_ to POST, but neither of the disks sound like they're running (either the internal HDD or the 3.5" drive). I presume the internal HDD requires the +12v to spin up, but I haven't dug into it yet. Anywho - if anyone had any documentation on this machine I would very much appreciate a scan. Or just confirmation what the power supply is supposed to be outputting would be very helpful. Thank you! - JP 50441

6 years, 2 months

Classic computers, and peripherals offers in France

by p.gebhardt＠ymail.com

Hello list, this might be of interest for list members located in France (Normandie) or close to it: There is seller who offers different types of classic systems. Micros as well as larger systems andwhat appears to be a punched card sorter from the 50s. He writes that he has more stuff and that he can send pictures upon request. Descriptions are in French, but google translate might help out... https://www.leboncoin.fr/recherche/?text=Informatique%20vintage&locations=B… Cheers, Pierre ----------------------------------------------------------------------------- http://www.digitalheritage.de

6 years, 2 months

HP 9000 Series 360 Thin LAN

by roger.addy＠charter.net

Hi All, I am using an HP 9000 Series 360 with a "Thin LAN" coax card to run a piece of equipment. The LAN connection is not currently being used.? I'm wondering if it's possible to connect it to a modern ethernet network?? If so, what could I do with it? I found an adapter on Amazon. I would like to be able to transfer files and possibly print.? The file systems are not compatible except for maybe ASCII files.? Anyone have any thoughts?? Even if I could transfer files into another HP 9000 system it would be beneficial. Thank you, Roger A.

6 years, 2 months

cctalk Digest, Vol 65, Issue 16

by frank＠tuccio.net

FWIW I have a copy of Version 3.11 from BCPR Services 1990 spec. Contact me off list if you're interested. Frank Tuccio KC2QQN frank at tuccio.net ------------------------------ Message: 7 Date: Sun, 23 Feb 2020 04:14:37 -0800 From: Al Kossow <aek at bitsavers.org> To: "'General Discussion: On-Topic and Off-Topic Posts'" <cctalk at classiccmp.org> Subject: Re: Looking for Extended Industry Standard Architecture Revision 3.10 Specification Message-ID: <2dcdf609-2997-b458-eb2a-115fec80f6a3 at bitsavers.org> Content-Type: text/plain; charset=utf-8; format=flowed On 2/22/20 11:45 PM, Ali wrote: > I am surprised that after thirty or so years and many of the original "gang of nine" being gone the standard has not made its way into the wild..... I was as well, which was why I tried digging for it as much as I did Global Engineering's standards search is really bad. I wasn't able to determine if they actually still sell it and I assume BCPR is long gone. End of cctalk Digest, Vol 65, Issue 16 **************************************

6 years, 2 months

Looking for manual for Panasonic KX-D4930

by mark＠markesystems.com

The Panasonic KX-D4930 is a ?Laptop Data Terminal?, which includes both a (non-backlit) LCD screen and a thermal printer in a laptop-like package. It was obviously intended to supplant the Silent-700, and in fact appears to do so quite nicely. It has an internal modem (Bell 212) as well as a 25-pin EIA connection, and can even be run from an internal 12-volt battery. However, either my Google-fu is exceptionally poor, or there?s truly no copy of its manual available on the Web. I do have the manual for the KX-D20, which is a VT-100 emulation cartridge for the terminal, but not the manual for the base unit itself. Specifically, I?m looking for the (non-VT-100) escape sequences that can control the terminal, if there are any. If anyone has a paper copy of the manual that could be scanned, I?d certainly appreciate it. In an ideal world, there would also be a service manual with schematics, but that?s probably too much to hope for... TIA! ~~ Mark Moulding

6 years, 2 months

VCF PNW 2020: Seattle, March 21st and 22nd

by mbbrutman＠brutman.com

Come join us at Living Computers:Museum+Labs next month for VCF PNW 2020! Here is what you can look forward to: - 24 exhibits, ranging from big iron to 8 bitters - 6 presentations including one from Bil Herd and one from Joe Decuir - Our first vintage computer typing contest! (Yes, it will be hilarious) - A consignment area for buying and selling treasure - The museum. A very nice museum at that. Details can be found at http://vcfed.org/vcf-pnw . Mike

6 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb