test-drb

test-drb@ccmp.vtda.org

101090 discussions

by guykd＠optusnet.com.au

At 04:46 PM 25/09/2019 -0500, you wrote: >If enough people want them, and someone gets a winning bid, then they can >come to me and I will repackage and ship them for the actual cost of >postage. > >Cindy Thanks for the kind offer. Where are you, relative to the seller? I can see a problem though. Isn't it impossible to have ebay-won items shipped to other than one's ebay-verified address? I'm not sure... I know to get things sent to my reshipper, I have to have them set as my 'real address' before bidding. That's why I asked if anyone is close enough to pick up the boards. Not to mention sidestepping the seller's problematical packing intentions. Guy >-----Original Message----- >From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Guy Dunphy >via cctalk >Sent: Wednesday, September 25, 2019 4:01 PM >To: Brent Hilpert; General Discussion: On-Topic and Off-Topic Posts >Subject: Re: HP vintage boards being sold as scrap > >At 12:00 PM 25/09/2019 -0700, you wrote: >>On 2019-Sep-25, at 3:07 AM, Guy Dunphy via cctalk wrote: >> >>> Does anyone else recognise some of the other boards? >> >> >>There is a stack of IO interface boards, including HSTs, for the HP >2100/1000 series there. >> >>Lower-right stack in this pic, 7 boards, boards have one red and one grey >handle: >> https://i.ebayimg.com/images/g/n08AAOSwjY5dg5Kd/s-l1600.jpg >> >>"HS Terminal" is discernible on one of them, and the one on top looks to be >an HS Terminal as well. >>Can't be certain about the others but they have the same size IO connector, >they may all be HSTs. >> >>HSTs are the basic RS232 & current loop, async serial-line interface >boards, 12531D, used for the console and such in the 2100/1000 series, >>going back to the early machines of the series. >> >>(HS is 'High-Speed', but that's relative to the late-60s, billed for up to >2400bps, but it is possible to operate them at higher speeds). >> >>I'd buy one for, say 60$, if someone picks up the bunch and wants to flog >one. > > > >Sigh. And here I am putting together a rack with a HP 1000 system. >Though, some of those edge connectors look corroded. > >I really would like those DtoA boards. So many! I have both a 3497A and the >3498A extender >plus a need for lots of cards for them. Plus I have the service manual with >schematics >so can repair them. > >Anyway... the seller is listed as being in Warren, Rhode Island, United >States. >I'm in Australia, and have a reshipper in the US. BUT, the reshipper is on >the west coast. > >Is there anyone on this list who lives in that area who could pick them up, >then pack and post >small sets of boards? I can afford to bid (fingers crossed), but _can't_ >afford the postage >of "90 lbs" across the continent. Let alone to Australia. > >The one existing bid, is that anyone here? > >Guy > > >--- >This email has been checked for viruses by Avast antivirus software. >https://www.avast.com/antivirus > >

6 years, 8 months

NOS old media and other stuff available

by sales＠elecplus.com

Send him an email, and he can send you a list. He is NOT interested in selling 1 or 2 boxes of floppies. He needs volume deals. I have a list of items available from a Value Added Reseller that closed several years ago and had these items in storage. All items are OEM, NOS and include LOTS of data media spanning generations (Round Reel data tapes, 4mm Cassette tapes, ????? Tape Cartridges, 35???, 5.25??? and 8??? Diskettes), Trillium and EnGenius phone equipment, various electronics components and packaging materials. Have images of many of the items available. Email netbuy at bellsouth.net and or buynetworks at gmail.com Netbuy LLC Robb Adams 386-585-5236 Cindy Croxton Electronics Plus --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

6 years, 8 months

DEC RP04 service manual available

by jnc＠mercury.lcs.mit.edu

> From: Evan Koblentz > I know of two RP04 drives in the wild. One belongs to a private > collector. VCF has the other. Right, but does VCF need it scanned? Oh, one other place that might have one: the MIT MC KL10 had a couple of RP04's; when it was taken away to Scandanavia, they might have gone with it. I think that machine is now at LCM? Noel

6 years, 8 months

Cleaning an old keyboard

by jnc＠mercury.lcs.mit.edu

> From: Al Kossow >> This is documented in NASA's official history of Project Mercury, for >> which it was invented. > could you post a pointer to the document where this appears? If the reference is to: Lloyd S. Swenson, James M. Grimwood, Charles C. Alexander; "This New Ocean: A History of Project Mercury"; SP-4201; NASA; Washington; 1966 "WD-40" does not appear in the index. There's another less likely book ("Project Mercury: A Chronology", or something like that), but I can't be bothered to drag it out and look, because I'm pretty sure that's incorrect. My understanding is that WD-40 was invented to protect the stainless steel skin of the Atlas ICBM (which was often left un-painted), built by Convair. I do recall seeing this in one of my Atlas books, which is alas currently not shelved, and I don't have time to find it. FWIW, Wikipedia agrees. The rest of that post (about how it's a waxy material in a solvent) is I think correct; it certainly agrees with its original intended usage (above). Noel

6 years, 8 months

DJ11 Maintenance Manual available

by jnc＠mercury.lcs.mit.edu

> From: Pierre Gebhardt > there seems to be a copy of the maintenance manual in the unibus-folder > on bitsavers: EK-DJ11-MM-003_DJ11_Maint_Man_Aug76.pdf Argh! I looked in that folder, but didn't see it! (And Manx says its not online, either.) > Would be worth checking the document revision. Mine's earlier: DEC-11-HDJAA-B-D. > What is missing, however, is an engineering manual with the schematics. Well, the M7820's will be the same as in the DH11. The M7285 and M7279 are DJ11-specific, though. I was going to say that 'does anyone even have any DJ11's any more, to need the drawings' (they're like lobotomized DZ11's - the serial line config is done with jumpers!), but on looking it turns out the RICM probably has some in their -11/45's. Noel

6 years, 8 months

Cleaning an old keyboard

by trash80＠internode.on.net

I resurrected an old keyboard and mouse I like. Not wishing to gross anyone out but it looks like over time there was a build-up of oil etc from my hands etc and over time being stored away its turned to a really almost hard paste like stuff on both the mouse and keyboard. I've tried number of agents to clean it off but limited success. Any tips please. Kevin Parker

6 years, 8 months

simh, professional 350, 380

by emu＠e-bbes.com

Hi all, I saw an old version from 2006 as "xhomer" which emulates the professional 350. Was there anywhere a version, which emulates the 380? Cheers

6 years, 8 months

Wanted: Scan of RF modulator article in Sept. 1978 Radio Electronics

by wh.sudbrink＠verizon.net

Hi, I'd like to read the second part of the article found here: https://www.schematicsforfree.com/archive/file/Video/Circuits/Video%20Modula tor.pdf I don't have a real print of the magazine and my Google-Fu fails me if it's already scanned somewhere. Thanks, Bill S. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

6 years, 8 months

Vintage computer store hints in Minneapolis?

by jplist2008＠kiwigeek.com

Morning all; I was up in Minneapolis over the weekend and will probably be back next weekend - I was wondering where the local geeks might go for some nifty goodness (for sale or just to gander at)? When I was up there I hit FreeGeek and picked up a SCSI SyQuest EZ135 external drive and a couple of carts. I also rolled through The Ax-Man... for 3 hours because I'd never even heard of the place before and was absolutely astonished at what I'd found. (If you've never been, you _must_ go) But I thought I'd poll and see what else might be found up there? I'm mostly a non-PC collector (Sun/SGI/Digital/+ random things) - but easily amused. Speaking of, there's a set of power supply modules for a PDP at The Ax-Man on University. There were several h744s and 745s and and an h754, although one of them someone has started to pry apart and the Molex (?) connector is broken from the PCB, although the pins were still attached to the board. They were asking $9.95 for each and I wasn't willing to buy and hope they worked. Cheers; - JP

6 years, 8 months

Pro 350 for sale on Craigslist

by Wayne.Sudol＠hotmail.com

Just saw this ? https://orangecounty.craigslist.org/sys/d/laguna-niguel-vintage-dec-compute… Ad Says? Vintage DEC Computer 350 Pro System - $450 (Laguna Niguel) Vintage Digital Equipment Corporation (DEC) computer system 350 Professional ( based on PD-11 chipset) 10 MB HDD , Monitor VR-201, Printer : Letterprinter 100 , Enclosure, Extensive set of Documentation. These Items are intended for collectors who have good knowledge and experience with old computers

6 years, 8 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb