test-drb

test-drb@ccmp.vtda.org

101090 discussions

WTB: XYlogics 472 Pertec Controller or Multibus to VME Adapter

by lists＠glitchwrks.com

All, I'm in search of either an XYlogics 472 in the Sun Multibus to VME adapter, or just a Multibus to VME adapter (can get the bare XYlogics boards). I'd prefer the Sun 501-1155 assembly since it has the right back panel connectors, but either way is better than neither way :) Thanks, Jonathan

4 years, 2 months

Intersil Eprom 66S018? (IM6653?)

by holm＠freibergnet.de

I have an old german PLC on the desk that I need to repair, it is an Eberle PLS511, build out of a 1Bit CPU build out of 4xxx CMOS Logic. I do have two slightly different units, one is equipped with 3 pcs 66S018 Eproms from Intersilm DC is 8319. I'm unable to find a datasheet for that device but I thin it is compatible to the old Intersil IM6653 1024x4 Bit Eprom to build the wordlength of 12 Bits out of 3 Roms.. There is a different memory Card equipped with 2 27C04, the jumpers are configured for a 2K Rom type..and it seems that the 27C064 ar only installed because of the CMOS Power consumption.. Can someone plase confirm that the 6653 is compatible to the 66S018 which may be a military variant? Is there a datasheet perferably including the description of the programming algorithm? Thanks in Advance, Holm -- Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe, Goethestrasse 15, 09569 Oederan, USt-Id: DE253710583 info at tsht.de Fax +49 37292 709779 Tel +49 37292 709778 Mobil: 0172 8790 741

4 years, 2 months

<Plug> HP1000 A series servers, interface card, cables, and accessories.

by lbickley＠bickleywest.com

On Sun, 17 Oct 2021 14:52:33 -0400 Jesse Dougherty via cctalk <cctalk at classiccmp.org> wrote: > I have A series servers, parts, interface cards, and probably any > accessory that you might need. If anyone is looking for any HP 1000 A > series hardware, let me know. I still have a few of these loaded A990 > boxes that I can do $1,700.00 each > > www.ebay.com/itm/384211227987 As a satisfied customer, I can vouch for Jesse's offer. I bought one of these systems over a year ago and it has performed flawlessly ever since. I've used it with multiple SCSI disks and GPIB disks (including HPDrive). Cheers, Lyle -- 73 NM6Y Bickley Consulting West https://bickleywest.com "Black holes are where God is dividing by zero"

4 years, 2 months

SMC*11E SMD Controller Information

by lists＠glitchwrks.com

Does anyone have information on a SMC*11E controller? Appears to be a two-drive SMD controller for Unibus (hex height module). Looking the connectors over, it looks like it'd probably drop into a MUD slot and use the SPC pins. Thanks, Jonathan

4 years, 2 months

<Plug> HP1000 A series servers, interface card, cables, and accessories.

by jesse＠cypress-tech.com

I have A series servers, parts, interface cards, and probably any accessory that you might need. If anyone is looking for any HP 1000 A series hardware, let me know. I still have a few of these loaded A990 boxes that I can do $1,700.00 each www.ebay.com/itm/384211227987 Thanks Jesse Cypress Technology Inc Jesse at Cypress-tech.com

4 years, 2 months

MS-DOS 1.25 8" Disk Image for Displaywriter

by mooreericnyc＠gmail.com

http://www.bitsavers.org/bits/IBM/Displaywriter/SSSD_20210926/MSDOS.IMD I have a copy of the disk this image was made from booted on my DW, and am trying to load easywriter or a little basrun compatible basic program onto an 8" disk with my greaseweazle. Not having much luck with the HxC software or winimage poking at that image, or loading what I would think would be compatible DOS disks on the DW. Does anyone have some pointers on tools to help me read this image, and make new images and add files? Thanks, -Eric

4 years, 2 months

Computhink Eagle 32 - software, docs, info?

by jules.richardson99＠gmail.com

Hey all, Someone in one of the Facebook vintage groups that I'm in just picked up a Computhink Eagle 32, an early-ish (appears to be circa 1981/82) 68000-based machine with integral display and keyboard. On the rear it has a 50-pin connection for floppy and a 34-pin connection for a hard disk, but they have no external peripherals for it, and also no software and documentation. It's quite possible that the floppy connection is simply Shugart; hard disk *maybe* SASI I suppose, skimping on the number of ground lines (in which case it likely ran an external bridge to ST412/506). Online searching shows up very little about this system; does anyone here happen to have one or know anything about them? This one seems to have a pair of 256KB memory boards fitted, but also (perhaps worryingly) an empty "video" slot - although CRT connections apparently route to the main system board, so there's a chance that there was just a video expansion option not fitted to this particular machine. Still, even if that's not an issue, without knowledge of drives and software it might forever remain in boat anchor territory... cheers, Jules

4 years, 2 months

LEX-11

by jacob.ritorto＠gmail.com

Does anyone have it? It supposedly came with TSX-Plus, which I grabbed >from the classiccmp site, here, but it seems missing from this distro. thx jake

4 years, 2 months

FTGH

by john＠forecast.name

Due to family medical issues I have to downsize and move into a retirement facility at the end of this month. The following are available for local pick up only in the Boston MA metro west region. I can be reached off-list at john at forecast.name. DEC VT180 with 4 floppy drives Includes HSC Inc?s CO16 8086 coprocessor with 256KB memory Full hardware documentation for the CO16 Documentation: Bios User?s Guide CP/M Operating System Manual Multiplan Manuals Microsoft M80/L80 Manua MBasic VT180 v5.21 Reference manual No software available. If/When I find the software I will make it available to whoever takes this system. Digital Research CP/M Plus distribution (includes 8? floppies) Acorn RISC OS 3 Programmers Reference Manuals Volumes 1 - 5 + Style Guide (This does not appear to be available on Bitsavers) Apple Inside Macintosh Volumes 1 - 6 Quicktime components Communications toolbox Apple Resedit reference Minix Software Minix 1.5 for Macintosh (including disks) Minix for the Atari ST Minix Binaries and Sources for IBM PC/AT (5?? floppies) Miscellaneous Macintosh Software (Pre MacOS) At Ease Kid Pix Kid Pix Companion SimEarth Sim City Sim Town Sim City 2000 Sim City 2000 Scenarios - Vol 1 Great Disasters Sim City Urban Renewal Kit Microsoft Flight Simulator Disk Doubler Auto Doubler Virtual Hard Disk Toolkit Reader Rabbit Metrowerks CodeWarrior Bronze Think C Version 5 Think Reference Miscellaneous Macintosh Books (Pre MacOS) The Apple Macintosh Book by Cary Lu Hypercard Developers Guide Miscellaneous Atari ST Software Balance Of Power Omnires Monitor PC Ditto Miscellaneous Atari ST Books Atari ST Internals Programmer?s Reference Guide Other: Atari 400/800 Disk Operating System Reference Manual Atari 810 Disk Drive Operators Manual

4 years, 2 months

WTB Smd controller

by grant＠millhouseindustries.com

Looking for a interphase Maverick Smd controller for the isa bus. I don't know if any other? companies made one.Regards,Sent from my Galaxy

4 years, 2 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

test-drb